## Changes
The built-in template contains a reference to `${bundle.environment}`.
This property has been deprecated in favor of `${bundle.target}` a long
time ago (#670), so we should no longer emit it. The environment field
will continue to be usable until we cut a new major version in some far
away future.
## Tests
* Unit tests
* The test `TestInterpolationWithTarget` still covers correct
interpolation of `${bundle.environment}`
## Changes
The issue reported in #1828 illustrates how using a YAML timestamp-like
value (a date in this case) causes an issue during conversion to and
from the typed configuration tree.
We use the `AsAny()` function on the `dyn.Value` when normalizing for
the `any` type. We only use the `any` type for variable values, because
they can assume every type. The `AsAny()` function returns a `time.Time`
for the time value during conversion **to** the typed configuration
tree. Upon conversion **from** the typed configuration tree back into
the dynamic configuration tree, we cannot distinguish a `time.Time`
struct from any other struct.
To address this, we use the underlying string value of the time value
when we normalize for the `any` type.
Fixes#1828.
## Tests
Existing unit tests pass
## Changes
This adds diagnostics for collaborative (production) deployment
scenarios, including:
- Bob deploys a bundle that is normally deployed by Alice, but this
fails because Bob can't write to `/Users/Alice/.bundle`.
- Charlie deploys a bundle that is normally deployed by Alice, but this
fails because he can't create a new pipeline where Alice would be the
owner.
- Alice deploys a bundle where she didn't list herself as one of the
CAN_MANAGE users in permissions. That can work, but is probably a
mistake.
## Tests
Unit tests, manual testing.
## Changes
Due to platform changes, all libraries, notebooks and etc. paths used in
Databricks must be started with either /Workspace or /Volumes prefix.
This PR makes sure that all bundle paths are correctly prefixed.
Note: this change is a breaking change if user previously configured and
used `/Workspace/Workspace` folder in their workspace file system or
having `/Workspace/${workspace.root_path}...` pattern configured
anywhere in their bundle config
Fixes: #1751
AI:
- [x] Scan DABs config and error out on
`/Workspace/${workspace.root_path}...` pattern usage
## Tests
Added unit tests
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Library glob expansion happens during deployment. Before that, all
entries that refer to local paths in resource definitions are made
relative to the _sync root_. Before #1694, they were made relative to
the _bundle root_. This PR didn't update the library glob expansion code
to use the sync root path.
If you were using the sync paths setting with library globs, the CLI
would fail to expand the globs because the code was using the wrong path
to anchor those globs.
This change fixes the issue.
## Tests
Manually confirmed that this fixes the issue reported in #1755.
## Changes
We added a custom resolver for the cluster to add filtering for the
cluster source when we list all clusters.
Without the filtering listing could take a very long time (5-10 mins)
which leads to lookup timeouts.
## Tests
Existing unit tests passing
## Changes
Fixes an `Error: no value assigned to required variable <variable>.`
when the main complex variable definition is defined in one file but
target override is defined in separate file which is included in the
main one.
## Tests
Added regression test
## Changes
This field allows a user to configure paths to synchronize to the
workspace.
Allowed values are relative paths to files and directories anchored at
the directory where the field is set. If one or more values traverse up
the directory tree (to an ancestor of the bundle root directory), the
CLI will dynamically determine the root path to use to ensure that the
file tree structure remains intact.
For example, given a `databricks.yml` in `my_bundle` that includes:
```yaml
sync:
paths:
- ../common
- .
```
Then upon synchronization, the workspace will look like:
```
.
├── common
│ └── lib.py
└── my_bundle
├── databricks.yml
└── notebook.py
```
If not set behavior remains identical.
## Tests
* Newly added unit tests for the mutators and under `bundle/tests`.
* Manually confirmed a bundle without this configuration works the same.
* Manually confirmed a bundle with this configuration works.
## Changes
These tests inadvertently re-ran mutators, the first time through
`loadTarget` and the second time by running `phases.Initialize()`
themselves. Some of the mutators that are executed in
`phases.Initialize()` are also run as part of `loadTarget`. This is
overdue a refactor to make it unambiguous what runs when. Until then,
this removes the duplicated execution.
## Tests
Unit tests pass.
## Changes
This PR addressed post-merge feedback from
https://github.com/databricks/cli/pull/1673.
## Tests
Unit tests, and manually.
```
Error: experiment undefined-experiment is not defined
at resources.experiments.undefined-experiment
in databricks.yml:11:26
Error: job undefined-job is not defined
at resources.jobs.undefined-job
in databricks.yml:6:19
Error: pipeline undefined-pipeline is not defined
at resources.pipelines.undefined-pipeline
in databricks.yml:14:24
Name: undefined-job
Target: default
Found 3 errors
```
## Changes
This adds configurable transformations based on the transformations
currently seen in `mode: development`.
Example databricks.yml showcasing how some transformations:
```
bundle:
name: my_bundle
targets:
dev:
presets:
prefix: "myprefix_" # prefix all resource names with myprefix_
pipelines_development: true # set development to true by default for pipelines
trigger_pause_status: PAUSED # set pause_status to PAUSED by default for all triggers and schedules
jobs_max_concurrent_runs: 10 # set max_concurrent runs to 10 by default for all jobs
tags:
dev: true
```
## Tests
* Existing process_target_mode tests that were adapted to use this new
code
* Unit tests specific for the new mutator
* Unit tests for config loading and merging
* Manual e2e testing
## Changes
Previously for all the libraries referenced in configuration DABs made
sure that there is corresponding artifact section.
But this is not really necessary and flexible, because local libraries
might be built outside of dabs context.
It also created difficult to follow logic in code where we back
referenced libraries to artifacts which was difficult to fllow
This PR does 3 things:
1. Allows all local libraries referenced in DABs config to be uploaded
to remote
2. Simplifies upload and glob references expand logic by doing this in
single place
3. Speed things up by uploading library only once and doing this in
parallel
## Tests
Added unit + integration tests + made sure that change is backward
compatible (no changes in existing tests)
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Since locations are already tracked in the dynamic value tree, we no
longer need to track it at the resource/artifact level. This PR:
1. Removes use of `paths.Paths`. Uses dyn.Location instead.
2. Refactors the validation of resources not being empty valued to be
generic across all resource types.
## Tests
Existing unit tests.
## Changes
This change enables overriding the default value of job parameters in
target overrides.
This is the same approach we already take for job clusters and job
tasks.
Closes#1620.
## Tests
Mutator unit tests and lightweight end-to-end tests.
## Changes
In https://github.com/databricks/cli/pull/1618 we introduced prepare
step in which Python wheel folder was cleaned. Now it was cleaned
everytime instead of only when there is a build command how it is used
to work.
This PR fixes it by only cleaning up dist folder when there is a build
command for wheels.
Fixes#1638
## Tests
Added regression test
## Changes
This PR:
1. Uses dynamic walking (via the `dyn.MapByPattern` func) to validate no
two resources have the same resource key. The allows us to remove this
validation at merge time.
2. Modifies `dyn.Mapping` to always return a sorted slice of pairs. This
makes traversal functions like `dyn.Walk` or `dyn.MapByPattern`
deterministic.
## Tests
Unit tests. Also manually.
## Changes
Some diagnostics can have multiple paths associated with them. For
instance, ensuring that unique resource keys are used across all
resources. This PR extends `diag.Diagnostic` to accept multiple paths.
This PR is symmetrical to
https://github.com/databricks/cli/pull/1610/files
## Tests
Unit tests
## Changes
Now prepare stage which does cleanup is execute once before every build,
so artifacts built into the same folder are correctly kept
Fixes workaround 2 from this issue #1602
## Tests
Added unit test
## Changes
This PR changes `diag.Diagnostics` to allow including multiple locations
associated with the diagnostic message. The diagnostics that now return
multiple locations with this PR are:
1. Warning for unknown keys in config.
2. Use of experimental.run_as
3. Accidental sync.exludes that exclude all files.
## Tests
Existing unit tests pass. New unit test case to assert on error message
when multiple locations are included.
Example output:
```
➜ bundle-playground-2 ~/cli2/cli/cli bundle validate
Warning: You are using the legacy mode of run_as. The support for this mode is experimental and might be removed in a future release of the CLI. In order to run the DLT pipelines in your DAB as the run_as user this mode changes the owners of the pipelines to the run_as identity, which requires the user deploying the bundle to be a workspace admin, and also a Metastore admin if the pipeline target is in UC.
at experimental.use_legacy_run_as
in resources.yml:10:22
databricks.yml:13:22
Name: fix run_if
Target: default
Workspace:
User: shreyas.goenka@databricks.com
Path: /Users/shreyas.goenka@databricks.com/.bundle/fix run_if/default
Found 1 warning
```
## Changes
At the moment we merge values of complex variables while more expected
behaviour is overriding the value with the target one.
## Tests
Added unit test
## Changes
Issue #1545 describes how a nil entry in the sync block caused an error.
The fix for this issue is in #1547. This change adds end-to-end test
coverage.
## Tests
New test passes on top of #1547.
## Changes
This combination of changes allows pretty-printing errors happening
during the "load" and "init" phases, including their locations.
Move to render code into a separate module dedicated to rendering
`diag.Diagnostics` in a human-readable format. This will be used for the
`bundle deploy` command.
Preserve the "bundle" value if an error occurs in mutators. Rewrite the
go templates to handle the case when the bundle isn't yet loaded if an
error occurs during loading, that is possible now.
Improve rendering for errors and warnings:
- don't render empty locations
- render "details" for errors if they exist
Add `root.ErrAlreadyPrinted` indicating that the error was already
printed, and the CLI entry point shouldn't print it again.
## Tests
Add tests for output, that are especially handy to detect extra newlines
## Changes
This PR makes two changes:
1. In https://github.com/databricks/cli/pull/1510 we'll be adding
multiple associated location metadata with a dyn.Value. The Go compiler
does not allow comparing structs if they contain slice values
(presumably due to multiple possible definitions for equality). In
anticipation for adding a `[]dyn.Location` type field to `dyn.Value`
this PR removes all direct comparisons of `dyn.Value` and instead relies
on the kind.
2. Retain location metadata for values in convert.FromTyped. The change
diff is exactly the same as https://github.com/databricks/cli/pull/1523.
It's been combined with this PR because they both depend on each other
to prevent test failures (forming a test failure deadlock).
Go patch used:
```
@@
var x expression
@@
-x == dyn.InvalidValue
+x.Kind() == dyn.KindInvalid
@@
var x expression
@@
-x != dyn.InvalidValue
+x.Kind() != dyn.KindInvalid
@@
var x expression
@@
-x == dyn.NilValue
+x.Kind() == dyn.KindNil
@@
var x expression
@@
-x != dyn.NilValue
+x.Kind() != dyn.KindNil
```
## Tests
Unit tests and integration tests pass.
## Changes
Added support for complex variables
Now it's possible to add and use complex variables as shown below
```
bundle:
name: complex-variables
resources:
jobs:
my_job:
job_clusters:
- job_cluster_key: key
new_cluster: ${var.cluster}
tasks:
- task_key: test
job_cluster_key: key
variables:
cluster:
description: "A cluster definition"
type: complex
default:
spark_version: "13.2.x-scala2.11"
node_type_id: "Standard_DS3_v2"
num_workers: 2
spark_conf:
spark.speculation: true
spark.databricks.delta.retentionDurationCheck.enabled: false
```
Fixes#1298
- [x] Support for complex variables
- [x] Allow variable overrides (with shortcut) in targets
- [x] Don't allow to provide complex variables via flag or env variable
- [x] Fail validation if complex value is used but not `type: complex`
provided
- [x] Support using variables inside complex variables
## Tests
Added unit tests
---------
Co-authored-by: shreyas-goenka <88374338+shreyas-goenka@users.noreply.github.com>
## Changes
This PR fixes the behaviour when variables were not overridden with
lookup value from targets if these variables had any default value set
in the default target.
Fixes#1449
## Tests
Added regression test
## Changes
This change adds support for Lakehouse monitoring in bundles.
The associated resource type name is "quality monitor".
## Testing
Unit tests.
---------
Co-authored-by: Pieter Noordhuis <pcnoordhuis@gmail.com>
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
Co-authored-by: Arpit Jasapara <87999496+arpitjasa-db@users.noreply.github.com>
## Changes
If only key was defined for a job in YAML config, validate previously
failed with segfault.
This PR validates that jobs are correctly defined and returns an error
if not.
## Tests
Added regression test
## Changes
Currently, there are a number of issues with the non-happy-path flows
for token refresh in the CLI.
If the token refresh fails, the raw error message is presented to the
user, as seen below. This message is very difficult for users to
interpret and doesn't give any clear direction on how to resolve this
issue.
```
Error: token refresh: Post "https://adb-<WSID>.azuredatabricks.net/oidc/v1/token": http 400: {"error":"invalid_request","error_description":"Refresh token is invalid"}
```
When logging in again, I've noticed that the timeout for logging in is
very short, only 45 seconds. If a user is using a password manager and
needs to login to that first, or needs to do MFA, 45 seconds may not be
enough time. to an account-level profile, it is quite frustrating for
users to need to re-enter account ID information when that information
is already stored in the user's `.databrickscfg` file.
This PR tackles these two issues. First, the presentation of error
messages from `databricks auth token` is improved substantially by
converting the `error` into a human-readable message. When the refresh
token is invalid, it will present a command for the user to run to
reauthenticate. If the token fetching failed for some other reason, that
reason will be presented in a nice way, providing front-line debugging
steps and ultimately redirecting users to file a ticket at this repo if
they can't resolve the issue themselves. After this PR, the new error
message is:
```
Error: a new access token could not be retrieved because the refresh token is invalid. To reauthenticate, run `.databricks/databricks auth login --host https://adb-<WSID>.azuredatabricks.net`
```
To improve the login flow, this PR modifies `databricks auth login` to
auto-complete the account ID from the profile when present.
Additionally, it increases the login timeout from 45 seconds to 1 hour
to give the user sufficient time to login as needed.
To test this change, I needed to refactor some components of the CLI
around profile management, the token cache, and the API client used to
fetch OAuth tokens. These are now settable in the context, and a
demonstration of how they can be set and used is found in
`auth_test.go`.
Separately, this also demonstrates a sort-of integration test of the CLI
by executing the Cobra command for `databricks auth token` from tests,
which may be useful for testing other end-to-end functionality in the
CLI. In particular, I believe this is necessary in order to set flag
values (like the `--profile` flag in this case) for use in testing.
## Tests
Unit tests cover the unhappy and happy paths using the mocked API
client, token cache, and profiler.
Manually tested
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
This PR partially reverts the changes in
https://github.com/databricks/cli/pull/1233 and puts the old code under
an "experimental.use_legacy_run_as" configuration. This gives customers
who ran into the breaking change made in the PR a way out.
## Tests
Both manually and via unit tests.
Manually verified that run_as works for pipelines now. And if a user
wants to use the feature they need to be both a Metastore and a
workspace admin.
---------
Error when the deploying user is a workspace admin but not a metastore
admin:
```
Error: terraform apply: exit status 1
Error: cannot update permissions: User is not a metastore admin for Metastore 'deco-uc-prod-aws-us-east-1'.
with databricks_permissions.pipeline_foo,
on bundle.tf.json line 23, in resource.databricks_permissions.pipeline_foo:
23: }
```
--------
Output of bundle validate:
```
➜ bundle-playground git:(master) ✗ cli bundle validate
Warning: You are using the legacy mode of run_as. The support for this mode is experimental and might be removed in a future release of the CLI. In order to run the DLT pipelines in your DAB as the run_as user this mode changes the owners of the pipelines to the run_as identity, which requires the user deploying the bundle to be a workspace admin, and also a Metastore admin if the pipeline target is in UC.
at experimental.use_legacy_run_as
in databricks.yml:13:22
Name: bundle-playground
Target: default
Workspace:
Host: https://dbc-a39a1eb1-ef95.cloud.databricks.com
User: shreyas.goenka@databricks.com
Path: /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default
Found 1 warning
```
## Changes
The main changes are:
1. Don't link artifacts to libraries anymore and instead just iterate
over all jobs and tasks when uploading artifacts and update local path
to remote
2. Iterating over `jobs.environments` to check if there are any local
libraries and checking that they exist locally
3. Added tests to check environments are handled correctly
End-to-end test will follow up
## Tests
Added regression test, existing tests (including integration one) pass
## Changes
All these validators will return warnings as part of `bundle validate`
run
Added 2 mutators:
1. To check that if tasks use job_cluster_key it is actually defined
2. To check if there are any files to sync as part of deployment
Also added `bundle.Parallel` to run them in parallel
To make sure mutators under bundle.Parallel do not mutate config,
introduced new `ReadOnlyMutator`, `ReadOnlyBundle` and `ReadOnlyConfig`.
Example
```
databricks bundle validate -p deco-staging
Warning: unknown field: new_cluster
at resources.jobs.my_job
in bundle.yml:24:7
Warning: job_cluster_key high_cpu_workload_job_cluster is not defined
at resources.jobs.my_job.tasks[0].job_cluster_key
in bundle.yml:35:28
Warning: There are no files to sync, please check your your .gitignore and sync.exclude configuration
at sync.exclude
in bundle.yml:18:5
Name: test
Target: default
Workspace:
Host: https://acme.databricks.com
User: andrew.nester@databricks.com
Path: /Users/andrew.nester@databricks.com/.bundle/test/default
Found 3 warnings
```
## Tests
Added unit tests
## Changes
In 0.217.0 we started to emit warning on unknown fields in YAML
configuration but wrongly considered YAML anchor blocks as unknown
field.
This PR fixes this by skipping normalising of YAML blocks.
## Tests
Added regression tests
## Changes
Variable substitution works as if the variable reference is literally
replaced with its contents.
The following fields should be interpreted in the same way regardless of
where the variable is defined:
```yaml
foo: ${var.some_path}
bar: "./${var.some_path}"
```
Before this change, `foo` would inherit the location information of the
variable definition. After this change, it uses the location information
of the variable reference, making the behavior for `foo` and `bar`
identical.
Fixes#1330.
## Tests
The new test passes only with the fix.
## Changes
This PR introduces an allow list for resource types that are allowed
when the run_as for the bundle is not the same as the current deployment
user.
This PR also adds a test to ensure that any new resources added to DABs
will have to add the resource to either the allow list or add an error
to fail when run_as identity is not the same as deployment user.
## Tests
Unit tests
## Changes
Prior to this change, the bundle configuration entry point was loaded
from the function `bundle.Load`. Other configuration files were only
loaded once the caller applied the first set of mutators. This
separation was unnecessary and not ideal in light of gathering
diagnostics while loading _any_ configuration file, not just the ones
from the includes.
This change:
* Updates `bundle.Load` to only verify that the specified path is a
valid bundle root.
* Moves mutators that perform loading to `bundle/config/loader`.
* Adds a "load" phase that takes the place of applying
`DefaultMutators`.
Follow ups:
* Rename `bundle.Load` -> `bundle.Find` (because it no longer performs
loading)
This change depends on #1316 and #1317.
## Tests
Tests pass.
## Changes
The bundle path was previously stored on the `config.Root` type under
the assumption that the first configuration file being loaded would set
it. This is slightly counterintuitive and we know what the path is upon
construction of the bundle. The new location for this property reflects
this.
## Tests
Unit tests pass.
## Changes
This diagnostics type allows us to capture multiple warnings as well as
errors in the return value. This is a preparation for returning
additional warnings from mutators in case we detect non-fatal problems.
* All return statements that previously returned an error now return
`diag.FromErr`
* All return statements that previously returned `fmt.Errorf` now return
`diag.Errorf`
* All `err != nil` checks now use `diags.HasError()` or `diags.Error()`
## Tests
* Existing tests pass.
* I confirmed no call site under `./bundle` or `./cmd/bundle` uses
`errors.Is` on the return value from mutators. This is relevant because
we cannot wrap errors with `%w` when calling `diag.Errorf` (like
`fmt.Errorf`; context in https://github.com/golang/go/issues/47641).
## Changes
These tests were located in `bundle/tests/bundle` which meant they were
unable to reuse the helper functions defined in the `bundle/tests`
package. There is no need for these tests to live outside the package.
## Tests
Existing tests pass.
## Changes
This change addresses the path resolution behavior in resource
definitions. Previously, all paths were resolved relative to where the
resource was first defined, which could lead to confusion and errors
when paths were specified in different directories. The new behavior is
to resolve paths relative to where they are defined, making it more
intuitive.
However, to avoid breaking existing configurations, compatibility with
the old behavior is maintained.
## Tests
* Existing unit tests for path translation pass.
* Additional test to cover both the nominal and the fallback behavior.
## Changes
This is a fundamental change to how we load and process bundle
configuration. We now depend on the configuration being represented as a
`dyn.Value`. This representation is functionally equivalent to Go's
`any` (it is variadic) and allows us to capture metadata associated with
a value, such as where it was defined (e.g. file, line, and column). It
also allows us to represent Go's zero values properly (e.g. empty
string, integer equal to 0, or boolean false).
Using this representation allows us to let the configuration model
deviate from the typed structure we have been relying on so far
(`config.Root`). We need to deviate from these types when using
variables for fields that are not a string themselves. For example,
using `${var.num_workers}` for an integer `workers` field was impossible
until now (though not implemented in this change).
The loader for a `dyn.Value` includes functionality to capture any and
all type mismatches between the user-defined configuration and the
expected types. These mismatches can be surfaced as validation errors in
future PRs.
Given that many mutators expect the typed struct to be the source of
truth, this change converts between the dynamic representation and the
typed representation on mutator entry and exit. Existing mutators can
continue to modify the typed representation and these modifications are
reflected in the dynamic representation (see `MarkMutatorEntry` and
`MarkMutatorExit` in `bundle/config/root.go`).
Required changes included in this change:
* The existing interpolation package is removed in favor of
`libs/dyn/dynvar`.
* Functionality to merge job clusters, job tasks, and pipeline clusters
are now all broken out into their own mutators.
To be implemented later:
* Allow variable references for non-string types.
* Surface diagnostics about the configuration provided by the user in
the validation output.
* Some mutators use a resource's configuration file path to resolve
related relative paths. These depend on `bundle/config/paths.Path` being
set and populated through `ConfigureConfigFilePath`. Instead, they
should interact with the dynamically typed configuration directly. Doing
this also unlocks being able to differentiate different base paths used
within a job (e.g. a task override with a relative path defined in a
directory other than the base job).
## Tests
* Existing unit tests pass (some have been modified to accommodate)
* Integration tests pass
Pieter Noordhuis
Lennart Kats (databricks)
Andrew Nester
shreyas-goenka
Gleb Kanterov
Aravind Segu
Miles Yucht