## Changes
Fixes https://github.com/databricks/cli/issues/559
The CLI generation is now stable and does not produce a diff for the
`bundle_descriptions.json` file.
Before a pointer to the schema was stored in the memo, which would be
mutated later to include the description. This lead to duplicate
documentation for schema components that were used in multiple places.
This PR fixes this issue.
Eg: Before all references of `pause_status` would have the same
description.
## Tests
Added regression test.
## Changes
This PR annotates any pipelines that were deployed using DABs to have
`deployment.kind` set to "BUNDLE", mirroring the annotation for Jobs
(similar PR for jobs FYI: https://github.com/databricks/cli/pull/880).
Breakglass UI is not yet available for pipelines, so this annotation
will just be used for revenue attribution ATM.
Note: The API field has been deployed in all regions including GovCloud.
## Tests
Unit tests and manually.
Manually verified that the kind and metadata_file_path are being set by
DABs, and are returned by a GET API to a pipeline deployed using a DAB.
Example:
```
"deployment": {
"kind":"BUNDLE",
"metadata_file_path":"/Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default/state/metadata.json"
},
```
`terraform show -json` (`terraform.Show()`) fails if the state file
contains resources with fields that non longer conform to the provider
schemas.
This can happen when you deploy a bundle with one version of the CLI,
then updated the CLI to a version that uses different databricks
terraform provider, and try to run `bundle run` or `bundle summary`.
Those commands don't recreate local terraform state (only `terraform
apply` or `plan` do) and terraform itself fails while parsing it.
[Terraform
docs](https://developer.hashicorp.com/terraform/language/state#format)
point out that it's best to use `terraform show` after successful
`apply` or `plan`.
Here we parse the state ourselves. The state file format is internal to
terraform, but it's more stable than our resource schemas. We only parse
a subset of fields from the state, and only update ID and ModifiedStatus
of bundle resources in the `terraform.Load` mutator.
## Changes
The installer.Upgrade() processing did not install Python dependencies.
This resulted in errors such as:
```
ModuleNotFoundError: No module named 'databricks.labs.blueprint'
```
Any new dependencies are now installed during the upgrade process.
Resolves: databrickslabs/ucx#1276
## Tests
The TestUpgraderWorksForReleases test now checks to see if the upgrade
process resulted in the dependencies being installed.
---------
Signed-off-by: Jim.Idle <jimi@idle.ws>
## Changes
* Currently, we use `auth profiles` command with
`DATABRICKS_CONFIG_FILE` env var set, the file pointed to by the env var
is ONLY used for loading the profile names (ini file sections). It is
not passed to go sdk config object. We also don't use env variable
loader in the go sdk config object, so this env var is ignored by the
config and only default file is read.
* This PR explicitly sets the config file path in the go sdk config
object.
## Tests
* integration tests in vscode
## Changes
This is a minor improvement to the error about wheel tasks with older
DBR versions, since we get questions about it every now and then. It
also adds a pointer to the docs that were added since the original
messages was committed.
---------
Co-authored-by: Pieter Noordhuis <pcnoordhuis@gmail.com>
This documentation is very outdated. We don't need this because the CLI
is self-documenting. Also users who land on this page (because of SEO
for example) can be confused because of the lack of documentation for
new commands.
Example issue: https://github.com/databricks/cli/issues/1331
## Changes
We are starting to sign Windows CLI executables, but this has to be done
from a machine with a Yubikey storing the signing certificate for the
immediate future. As such, we will only trigger Winget publishing once
the signed binaries have been uploaded to Github.
Additionally, as an extra precaution, we will only release the signed
binaries via Winget.
## Tests
<!-- How is this tested? -->
## Changes
This PR partially reverts the changes in
https://github.com/databricks/cli/pull/1233 and puts the old code under
an "experimental.use_legacy_run_as" configuration. This gives customers
who ran into the breaking change made in the PR a way out.
## Tests
Both manually and via unit tests.
Manually verified that run_as works for pipelines now. And if a user
wants to use the feature they need to be both a Metastore and a
workspace admin.
---------
Error when the deploying user is a workspace admin but not a metastore
admin:
```
Error: terraform apply: exit status 1
Error: cannot update permissions: User is not a metastore admin for Metastore 'deco-uc-prod-aws-us-east-1'.
with databricks_permissions.pipeline_foo,
on bundle.tf.json line 23, in resource.databricks_permissions.pipeline_foo:
23: }
```
--------
Output of bundle validate:
```
➜ bundle-playground git:(master) ✗ cli bundle validate
Warning: You are using the legacy mode of run_as. The support for this mode is experimental and might be removed in a future release of the CLI. In order to run the DLT pipelines in your DAB as the run_as user this mode changes the owners of the pipelines to the run_as identity, which requires the user deploying the bundle to be a workspace admin, and also a Metastore admin if the pipeline target is in UC.
at experimental.use_legacy_run_as
in databricks.yml:13:22
Name: bundle-playground
Target: default
Workspace:
Host: https://dbc-a39a1eb1-ef95.cloud.databricks.com
User: shreyas.goenka@databricks.com
Path: /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default
Found 1 warning
```
## Changes
With this change, both job parameters and task parameters can be
specified as positional arguments to bundle run. How the positional
arguments are interpreted depends on the configuration of the job.
### Examples:
For a job that has job parameters configured a user can specify:
```
databricks bundle run my_job -- --param1=value1 --param2=value2
```
And the run is kicked off with job parameters set to:
```json
{
"param1": "value1",
"param2": "value2"
}
```
Similarly, for a job that doesn't use job parameters and only has
`notebook_task` tasks, a user can specify:
```
databricks bundle run my_notebook_job -- --param1=value1 --param2=value2
```
And the run is kicked off with task level `notebook_params` configured
as:
```json
{
"param1": "value1",
"param2": "value2"
}
```
For a job that doesn't doesn't use job parameters and only has either
`spark_python_task` or `python_wheel_task` tasks, a user can specify:
```
databricks bundle run my_python_file_job -- --flag=value other arguments
```
And the run is kicked off with task level `python_params` configured as:
```json
[
"--flag=value",
"other",
"arguments"
]
```
The same is applied to jobs with only `spark_jar_task` or
`spark_submit_task` tasks.
## Tests
Unit tests. Tested the completions manually.
## Changes
The main changes are:
1. Don't link artifacts to libraries anymore and instead just iterate
over all jobs and tasks when uploading artifacts and update local path
to remote
2. Iterating over `jobs.environments` to check if there are any local
libraries and checking that they exist locally
3. Added tests to check environments are handled correctly
End-to-end test will follow up
## Tests
Added regression test, existing tests (including integration one) pass
## Changes
This enable queueing for jobs by default, following the behavior from
API 2.2+. Queing is a best practice and will be the default in API 2.2.
Since we're still using API 2.1 which has queueing disabled by default,
this PR enables queuing using a mutator.
Customers can manually turn off queueing for any job by adding the
following to their job spec:
```
queue:
enabled: false
```
## Tests
Unit tests, manual confirmation of property after deployment.
---------
Co-authored-by: Pieter Noordhuis <pcnoordhuis@gmail.com>
## Changes
I spotted a few call sites where the path of a test file was synthesized
multiple times. It is easier to capture the path as a variable and reuse
it.
## Changes
The default template includes a final newline but this was missing from
the cmdgroup template. This change also adds test coverage for inherited
flags and the flag group description.
Bumps [golang.org/x/net](https://github.com/golang/net) from 0.22.0 to
0.23.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="c48da13158"><code>c48da13</code></a>
http2: fix TestServerContinuationFlood flakes</li>
<li><a
href="762b58d1cf"><code>762b58d</code></a>
http2: fix tipos in comment</li>
<li><a
href="ba872109ef"><code>ba87210</code></a>
http2: close connections when receiving too many headers</li>
<li><a
href="ebc8168ac8"><code>ebc8168</code></a>
all: fix some typos</li>
<li><a
href="3678185f8a"><code>3678185</code></a>
http2: make TestCanonicalHeaderCacheGrowth faster</li>
<li><a
href="448c44f928"><code>448c44f</code></a>
http2: remove clientTester</li>
<li><a
href="c7877ac421"><code>c7877ac</code></a>
http2: convert the remaining clientTester tests to testClientConn</li>
<li><a
href="d8870b0bf2"><code>d8870b0</code></a>
http2: use synthetic time in TestIdleConnTimeout</li>
<li><a
href="d73acffdc9"><code>d73acff</code></a>
http2: only set up deadline when Server.IdleTimeout is positive</li>
<li><a
href="89f602b7bb"><code>89f602b</code></a>
http2: validate client/outgoing trailers</li>
<li>Additional commits viewable in <a
href="https://github.com/golang/net/compare/v0.22.0...v0.23.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
You can disable automated security fix PRs for this repo from the
[Security Alerts
page](https://github.com/databricks/cli/network/alerts).
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
## Changes
The sync struct initialization would recreate the deleted `file_path`.
This PR moves to not initializing the sync object to delete the
snapshot, thus fixing the lingering `file_path` after `bundle destroy`.
## Tests
Manually, and a integration test to prevent regression.
## Changes
Fixes to get host from the workspace client rather than only printing
the host when it's configured in the bundle config.
## Tests
Manually. When a profile was specified for auth.
Before:
```
➜ bundle-playground git:(master) ✗ cli bundle validate
Name: bundle-playground
Target: default
Workspace:
Host:
User: shreyas.goenka@databricks.com
Path: /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default
```
After:
```
➜ bundle-playground git:(master) ✗ cli bundle validate
Name: bundle-playground
Target: default
Workspace:
Host: https://e2-dogfood.staging.cloud.databricks.com
User: shreyas.goenka@databricks.com
Path: /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default
```
## Changes
This PR:
1. Uses bash to run the setup.sh script instead of the native busybox sh
shipped with alpine.
2. Verifies the checksums of the installed terraform CLI binaries.
## Tests
Manually. The docker image successfully builds.
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
All these validators will return warnings as part of `bundle validate`
run
Added 2 mutators:
1. To check that if tasks use job_cluster_key it is actually defined
2. To check if there are any files to sync as part of deployment
Also added `bundle.Parallel` to run them in parallel
To make sure mutators under bundle.Parallel do not mutate config,
introduced new `ReadOnlyMutator`, `ReadOnlyBundle` and `ReadOnlyConfig`.
Example
```
databricks bundle validate -p deco-staging
Warning: unknown field: new_cluster
at resources.jobs.my_job
in bundle.yml:24:7
Warning: job_cluster_key high_cpu_workload_job_cluster is not defined
at resources.jobs.my_job.tasks[0].job_cluster_key
in bundle.yml:35:28
Warning: There are no files to sync, please check your your .gitignore and sync.exclude configuration
at sync.exclude
in bundle.yml:18:5
Name: test
Target: default
Workspace:
Host: https://acme.databricks.com
User: andrew.nester@databricks.com
Path: /Users/andrew.nester@databricks.com/.bundle/test/default
Found 3 warnings
```
## Tests
Added unit tests
This PR improves the documentation for the `auth login` command,
accounting for the various ways this command can be used in.
---------
Co-authored-by: PaulCornellDB <paul.cornell@databricks.com>
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Allows for the syntax below
```
variables:
service_principal_app_id:
description: 'The app id of the service principal for running workflows as.'
lookup:
service_principal: "sp-${bundle.environment}"
```
Fixes#1259
## Tests
Added regression test
## Changes
This changes `databricks bundle deploy` so that it skips the lock
acquisition/release step for a `mode: development` target:
* This saves about 2 seconds (measured over 100 runs on a quiet/busy
workspace).
* This helps avoid the `deploy lock acquired by lennart@company.com at
2024-02-28 15:48:38.40603 +0100 CET. Use --force-lock to override` error
* Risk: this may cause deployment conflicts, but since dev mode
deployments are always scoped to a user, that risk should be minimal
Update after discussion:
* This behavior can now be disabled via a setting.
* Docs PR: https://github.com/databricks/docs/pull/15873
## Measurements
### 100 deployments of the "python_default" project to an empty
workspace
_Before this branch:_
p50 time: 11.479 seconds
p90 time: 11.757 seconds
_After this branch:_
p50 time: 9.386 seconds
p90 time: 9.599 seconds
### 100 deployments of the "python_default" project to a busy (staging)
workspace
_Before this branch:_
* p50 time: 13.335 seconds
* p90 time: 15.295 seconds
_After this branch:_
* p50 time: 11.397 seconds
* p90 time: 11.743 seconds
### Typical duration of deployment steps
* Acquiring Deployment Lock: 1.096 seconds
* Deployment Preparations and Operations: 1.477 seconds
* Uploading Artifacts: 1.26 seconds
* Finalizing Deployment: 9.699 seconds
* Releasing Deployment Lock: 1.198 seconds
---------
Co-authored-by: Pieter Noordhuis <pcnoordhuis@gmail.com>
Co-authored-by: Andrew Nester <andrew.nester.dev@gmail.com>
## Changes
We currently issue a warning if an integer is used where a floating
point number is expected. But if they are convertible, we should convert
and not issue a warning. This change fixes normalization if they are
convertible between each other. We still produce a warning if the type
conversion leads to a loss in precision.
## Tests
Unit tests pass.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Andrew Nester <andrew.nester@databricks.com>
## Changes
This PR follows instructions in
https://goreleaser.com/cookbooks/multi-platform-docker-images/ to create
a multi-arch docker CLI image. Thus customers can simply specify `docker
pull ghcr.io/databricks/cli:latest` to pull and run the image.
The current approach uses the `docker manifest` support in goreleaser to
create a multi-arch image. This has a couple of pros and cons. TLDR; The
changes as is in the PR are good to go and very low risk. The
information provided here is just FYI.
pros:
Fewer configurations/workflows for us to manage/maintain. Goreleaser
makes sure the correct CLI binary is in place when building the CLI and
also takes care of publishing it to the Github Container Registry.
cons:
Goreleaser only supports [docker
manifest](https://docs.docker.com/reference/cli/docker/manifest/) to
create multi-arch images. This has a few minor disadvantages:
1. `goreleaser` pushes all intermediate images (arm64 and and64 specific
images) to the registry. This is required for the manifest to reference
them. See: https://github.com/goreleaser/goreleaser/issues/2606
Note: We have a migration path here, if someday we stop publishing
intermediate images, we can simply tag the "multi-arch" image as both
`latest-amd64` and `latest-arm64`. For now, these are separate images.
see: https://github.com/databricks/cli/pkgs/container/cli
2. `docker manifest` is technically an experimental command. Though it's
been out for multiple years now and the indirect dependency by
`goreleaser` should be fine. In any case, we can migrate by moving our
docker build process off goreleaser if we need to.
## Tests
Tested manually by publishing a new release for `v0.0.0-docker` in
ghcr.io.
1. Package: https://github.com/databricks/cli/pkgs/container/cli
2. Release workflow:
https://github.com/databricks/cli/actions/runs/8689359851
Tests the image itself by running it manually:
```
➜ cli git:(feature/multi-arch-docker) docker pull ghcr.io/databricks/cli:latest
latest: Pulling from databricks/cli
bca4290a9639: Already exists
6d445556910d: Already exists
Digest: sha256:82eabc500b541a89182aed4d3158c955e57c1e84d9616b76510aceb1d9024425
Status: Downloaded newer image for ghcr.io/databricks/cli:latest
ghcr.io/databricks/cli:latest
What's Next?
View a summary of image vulnerabilities and recommendations → docker scout quickview ghcr.io/databricks/cli:latest
➜ cli git:(feature/multi-arch-docker) docker run ghcr.io/databricks/cli --version
Databricks CLI v0.0.0-docker
```
## Changes
This PR is a minor UX improvement. By not autofilling the https://
prefix in Databricks Host we allow users to directly copy-paste from
their browser.
UX:
```
➜ cli git:(fix/copy-host) cli auth login
Databricks Profile Name: my-profile
Databricks Host (e.g. https://<databricks-instance>.cloud.databricks.com): https://foobar.cloud.databricks.com
Profile my-profile was successfully saved
```
## Tests
Manually.
## Changes
Transform artifact files source patterns in build not upload stage
Resolves the following warning
```
artifact section is not defined for file at /Users/andrew.nester/dabs/wheel/target/myjar.jar. Skipping uploading. In order to use the define 'artifacts' section
```
## Tests
Unit test pass
## Changes
This PR makes changes to support creating a docker image for the CLI
with the `terraform` dependencies built in. This is useful for customers
that operate in a network-restricted environment. Normally DABs makes
API calls to registry.terraform.io to setup the terraform dependencies,
with this setup the CLI/DABs will rely on the provider binaries bundled
in the docker image.
### Specifically this PR makes the following changes:
----------------
Modifies the CLI release workflow to publish the docker images in the
Github Container Registry. URL:
https://github.com/databricks/cli/pkgs/container/cli.
We use docker support in `goreleaser` to build and publish the images.
Using goreleaser ensures the CLI packaged in the docker image is the
same release artifact as the normal releases. For more information see:
1. https://goreleaser.com/cookbooks/multi-platform-docker-images
2. https://goreleaser.com/customization/docker/
Other choices made include:
1. Using `alpine` as the base image. The reason is `alpine` is a small
and lightweight linux distribution (~5MB) and an industry standard.
2. Not using [docker
manifest](https://docs.docker.com/reference/cli/docker/manifest) to
create a multi-arch build. This is because the functionality is still
experimental.
------------------
Make the `DATABRICKS_TF_VERSION` and `DATABRICKS_TF_PROVIDER_VERSION`
environment variables optional for using the terraform file mirror.
While it's not strictly necessary to make the docker image work, it's
the "right" behaviour and reduces complexity. The rationale is:
- These environment variables here are needed so the Databricks CLI does
not accidentally use the file mirror bundled with VSCode if it's
incompatible. This does not require the env vars to be mandatory.
context: https://github.com/databricks/cli/pull/1294
- This makes the `Dockerfile` and `setup.sh` simpler. We don't need an
[entrypoint.sh script to set the version environment
variables](https://medium.com/@leonardo5621_66451/learn-how-to-use-entrypoint-scripts-in-docker-images-fede010f172d).
This also makes using an interactive terminal with `docker run -it ...`
work out of the box.
## Tests
Tested manually.
--------------------
To test the release pipeline I triggered a couple of dummy releases and
verified that the images are built successfully and uploaded to Github.
1. https://github.com/databricks/cli/pkgs/container/cli
3. workflow for release:
https://github.com/databricks/cli/actions/runs/8646106333
--------------------
I tested the docker container itself by setting up
[Charles](https://www.charlesproxy.com/) as an HTTP proxy and verifying
that no HTTP requests are made to `registry.terraform.io`
Before:
FYI, The Charles web proxy is hosted at localhost:8888.
```
shreyas.goenka@THW32HFW6T bundle-playground % rm -r .databricks
shreyas.goenka@THW32HFW6T bundle-playground % HTTP_PROXY="http://localhost:8888" HTTPS_PROXY="http://localhost:8888" cli bundle deploy
Uploading bundle files to /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default/files...
Deploying resources...
Updating deployment state...
Deployment complete!
```
<img width="1275" alt="Screenshot 2024-04-11 at 3 21 45 PM"
src="https://github.com/databricks/cli/assets/88374338/15f37324-afbd-47c0-a40e-330ab232656b">
After:
This time bundle deploy is run from inside the docker container. We use
`host.docker.internal` to map to localhost on the host machine, and -v
to mount the host file system as a volume.
```
shreyas.goenka@THW32HFW6T bundle-playground % docker run -v ~/projects/bundle-playground:/bundle -v ~/.databrickscfg:/root/.databrickscfg -it --entrypoint /bin/sh -e HTTP_PROXY="http://host.docker.internal:8888" -e HTTPS_PROXY="http://host.docker.internal:8888" --network host ghcr.io/databricks/cli:latest-arm64
/ # cd /bundle/
/bundle # rm -r .databricks/
/bundle # databricks bundle deploy
Uploading bundle files to /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default/files...
Deploying resources...
Updating deployment state...
Deployment complete!
```
<img width="1275" alt="Screenshot 2024-04-11 at 3 22 54 PM"
src="https://github.com/databricks/cli/assets/88374338/2a8f097e-734b-4b3e-8075-c02e98a1b275">
## Changes
In 0.217.0 we started to emit warning on unknown fields in YAML
configuration but wrongly considered YAML anchor blocks as unknown
field.
This PR fixes this by skipping normalising of YAML blocks.
## Tests
Added regression tests
Bumps [golang.org/x/sync](https://github.com/golang/sync) from 0.6.0 to
0.7.0.
<details>
<summary>Commits</summary>
<ul>
<li><a
href="14be23e5b4"><code>14be23e</code></a>
semaphore: cancel acquisition with a done context</li>
<li>See full diff in <a
href="https://github.com/golang/sync/compare/v0.6.0...v0.7.0">compare
view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
## Changes
`preinit` script needs to be executed before processing configuration
files to allow the script to modify the configuration or add own
configuration files.
Andrew Nester
shreyas-goenka
Ilia Babanov
dependabot[bot]
Pieter Noordhuis
Jim Idle
Kartik Gupta
Lennart Kats (databricks)
Miles Yucht
Gleb Kanterov