## Changes
All these validators will return warnings as part of `bundle validate`
run
Added 2 mutators:
1. To check that if tasks use job_cluster_key it is actually defined
2. To check if there are any files to sync as part of deployment
Also added `bundle.Parallel` to run them in parallel
To make sure mutators under bundle.Parallel do not mutate config,
introduced new `ReadOnlyMutator`, `ReadOnlyBundle` and `ReadOnlyConfig`.
Example
```
databricks bundle validate -p deco-staging
Warning: unknown field: new_cluster
at resources.jobs.my_job
in bundle.yml:24:7
Warning: job_cluster_key high_cpu_workload_job_cluster is not defined
at resources.jobs.my_job.tasks[0].job_cluster_key
in bundle.yml:35:28
Warning: There are no files to sync, please check your your .gitignore and sync.exclude configuration
at sync.exclude
in bundle.yml:18:5
Name: test
Target: default
Workspace:
Host: https://acme.databricks.com
User: andrew.nester@databricks.com
Path: /Users/andrew.nester@databricks.com/.bundle/test/default
Found 3 warnings
```
## Tests
Added unit tests
## Changes
Allows for the syntax below
```
variables:
service_principal_app_id:
description: 'The app id of the service principal for running workflows as.'
lookup:
service_principal: "sp-${bundle.environment}"
```
Fixes#1259
## Tests
Added regression test
## Changes
This changes `databricks bundle deploy` so that it skips the lock
acquisition/release step for a `mode: development` target:
* This saves about 2 seconds (measured over 100 runs on a quiet/busy
workspace).
* This helps avoid the `deploy lock acquired by lennart@company.com at
2024-02-28 15:48:38.40603 +0100 CET. Use --force-lock to override` error
* Risk: this may cause deployment conflicts, but since dev mode
deployments are always scoped to a user, that risk should be minimal
Update after discussion:
* This behavior can now be disabled via a setting.
* Docs PR: https://github.com/databricks/docs/pull/15873
## Measurements
### 100 deployments of the "python_default" project to an empty
workspace
_Before this branch:_
p50 time: 11.479 seconds
p90 time: 11.757 seconds
_After this branch:_
p50 time: 9.386 seconds
p90 time: 9.599 seconds
### 100 deployments of the "python_default" project to a busy (staging)
workspace
_Before this branch:_
* p50 time: 13.335 seconds
* p90 time: 15.295 seconds
_After this branch:_
* p50 time: 11.397 seconds
* p90 time: 11.743 seconds
### Typical duration of deployment steps
* Acquiring Deployment Lock: 1.096 seconds
* Deployment Preparations and Operations: 1.477 seconds
* Uploading Artifacts: 1.26 seconds
* Finalizing Deployment: 9.699 seconds
* Releasing Deployment Lock: 1.198 seconds
---------
Co-authored-by: Pieter Noordhuis <pcnoordhuis@gmail.com>
Co-authored-by: Andrew Nester <andrew.nester.dev@gmail.com>
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Andrew Nester <andrew.nester@databricks.com>
## Changes
Transform artifact files source patterns in build not upload stage
Resolves the following warning
```
artifact section is not defined for file at /Users/andrew.nester/dabs/wheel/target/myjar.jar. Skipping uploading. In order to use the define 'artifacts' section
```
## Tests
Unit test pass
## Changes
This PR makes changes to support creating a docker image for the CLI
with the `terraform` dependencies built in. This is useful for customers
that operate in a network-restricted environment. Normally DABs makes
API calls to registry.terraform.io to setup the terraform dependencies,
with this setup the CLI/DABs will rely on the provider binaries bundled
in the docker image.
### Specifically this PR makes the following changes:
----------------
Modifies the CLI release workflow to publish the docker images in the
Github Container Registry. URL:
https://github.com/databricks/cli/pkgs/container/cli.
We use docker support in `goreleaser` to build and publish the images.
Using goreleaser ensures the CLI packaged in the docker image is the
same release artifact as the normal releases. For more information see:
1. https://goreleaser.com/cookbooks/multi-platform-docker-images
2. https://goreleaser.com/customization/docker/
Other choices made include:
1. Using `alpine` as the base image. The reason is `alpine` is a small
and lightweight linux distribution (~5MB) and an industry standard.
2. Not using [docker
manifest](https://docs.docker.com/reference/cli/docker/manifest) to
create a multi-arch build. This is because the functionality is still
experimental.
------------------
Make the `DATABRICKS_TF_VERSION` and `DATABRICKS_TF_PROVIDER_VERSION`
environment variables optional for using the terraform file mirror.
While it's not strictly necessary to make the docker image work, it's
the "right" behaviour and reduces complexity. The rationale is:
- These environment variables here are needed so the Databricks CLI does
not accidentally use the file mirror bundled with VSCode if it's
incompatible. This does not require the env vars to be mandatory.
context: https://github.com/databricks/cli/pull/1294
- This makes the `Dockerfile` and `setup.sh` simpler. We don't need an
[entrypoint.sh script to set the version environment
variables](https://medium.com/@leonardo5621_66451/learn-how-to-use-entrypoint-scripts-in-docker-images-fede010f172d).
This also makes using an interactive terminal with `docker run -it ...`
work out of the box.
## Tests
Tested manually.
--------------------
To test the release pipeline I triggered a couple of dummy releases and
verified that the images are built successfully and uploaded to Github.
1. https://github.com/databricks/cli/pkgs/container/cli
3. workflow for release:
https://github.com/databricks/cli/actions/runs/8646106333
--------------------
I tested the docker container itself by setting up
[Charles](https://www.charlesproxy.com/) as an HTTP proxy and verifying
that no HTTP requests are made to `registry.terraform.io`
Before:
FYI, The Charles web proxy is hosted at localhost:8888.
```
shreyas.goenka@THW32HFW6T bundle-playground % rm -r .databricks
shreyas.goenka@THW32HFW6T bundle-playground % HTTP_PROXY="http://localhost:8888" HTTPS_PROXY="http://localhost:8888" cli bundle deploy
Uploading bundle files to /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default/files...
Deploying resources...
Updating deployment state...
Deployment complete!
```
<img width="1275" alt="Screenshot 2024-04-11 at 3 21 45 PM"
src="https://github.com/databricks/cli/assets/88374338/15f37324-afbd-47c0-a40e-330ab232656b">
After:
This time bundle deploy is run from inside the docker container. We use
`host.docker.internal` to map to localhost on the host machine, and -v
to mount the host file system as a volume.
```
shreyas.goenka@THW32HFW6T bundle-playground % docker run -v ~/projects/bundle-playground:/bundle -v ~/.databrickscfg:/root/.databrickscfg -it --entrypoint /bin/sh -e HTTP_PROXY="http://host.docker.internal:8888" -e HTTPS_PROXY="http://host.docker.internal:8888" --network host ghcr.io/databricks/cli:latest-arm64
/ # cd /bundle/
/bundle # rm -r .databricks/
/bundle # databricks bundle deploy
Uploading bundle files to /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default/files...
Deploying resources...
Updating deployment state...
Deployment complete!
```
<img width="1275" alt="Screenshot 2024-04-11 at 3 22 54 PM"
src="https://github.com/databricks/cli/assets/88374338/2a8f097e-734b-4b3e-8075-c02e98a1b275">
## Changes
In 0.217.0 we started to emit warning on unknown fields in YAML
configuration but wrongly considered YAML anchor blocks as unknown
field.
This PR fixes this by skipping normalising of YAML blocks.
## Tests
Added regression tests
## Changes
`preinit` script needs to be executed before processing configuration
files to allow the script to modify the configuration or add own
configuration files.
## Changes
Variable substitution works as if the variable reference is literally
replaced with its contents.
The following fields should be interpreted in the same way regardless of
where the variable is defined:
```yaml
foo: ${var.some_path}
bar: "./${var.some_path}"
```
Before this change, `foo` would inherit the location information of the
variable definition. After this change, it uses the location information
of the variable reference, making the behavior for `foo` and `bar`
identical.
Fixes#1330.
## Tests
The new test passes only with the fix.
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't
alter it yourself. You can also trigger a rebase manually by commenting
`@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits
that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after
your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge
and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating
it. You can achieve the same result by closing it manually
- `@dependabot show <dependency name> ignore conditions` will show all
of the ignore conditions of the specified dependency
- `@dependabot ignore this major version` will close this PR and stop
Dependabot creating any more for this major version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop
Dependabot creating any more for this minor version (unless you reopen
the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop
Dependabot creating any more for this dependency (unless you reopen the
PR or upgrade to it yourself)
</details>
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Andrew Nester <andrew.nester@databricks.com>
- Add `bundle debug terraform` command. It prints versions of the
Terraform and the Databricks Terraform provider. In the text mode it
also explains how to setup the CLI in environments with restricted
internet access.
- Use `DATABRICKS_TF_EXEC_PATH` env var to point Databricks CLI to the
Terraform binary. The CLI only uses it if `DATABRICKS_TF_VERSION`
matches the currently used terraform version.
- Use `DATABRICKS_TF_CLI_CONFIG_FILE` env var to point Terraform CLI
config that points to the filesystem mirror for the Databricks provider.
The CLI only uses it if `DATABRICKS_TF_PROVIDER_VERSION` matches the
currently used provider version.
Relevant PR on the VSCode extension side:
https://github.com/databricks/databricks-vscode/pull/1147
Example output of the `databricks bundle debug terraform`:
```
Terraform version: 1.5.5
Terraform URL: https://releases.hashicorp.com/terraform/1.5.5
Databricks Terraform Provider version: 1.38.0
Databricks Terraform Provider URL: https://github.com/databricks/terraform-provider-databricks/releases/tag/v1.38.0
Databricks CLI downloads its Terraform dependencies automatically.
If you run the CLI in an air-gapped environment, you can download the dependencies manually and set these environment variables:
DATABRICKS_TF_VERSION=1.5.5
DATABRICKS_TF_EXEC_PATH=/path/to/terraform/binary
DATABRICKS_TF_PROVIDER_VERSION=1.38.0
DATABRICKS_TF_CLI_CONFIG_FILE=/path/to/terraform/cli/config.tfrc
Here is an example *.tfrc configuration file:
disable_checkpoint = true
provider_installation {
filesystem_mirror {
path = "/path/to/a/folder/with/databricks/terraform/provider"
}
}
The filesystem mirror path should point to the folder with the Databricks Terraform Provider. The folder should have this structure: /registry.terraform.io/databricks/databricks/terraform-provider-databricks_1.38.0_ARCH.zip
For more information about filesystem mirrors, see the Terraform documentation: https://developer.hashicorp.com/terraform/cli/config/config-file#filesystem_mirror
```
---------
Co-authored-by: shreyas-goenka <88374338+shreyas-goenka@users.noreply.github.com>
## Changes
Allow specifying CLI version constraints required to run the bundle
Example of configuration:
#### only allow specific version
```
bundle:
name: my-bundle
databricks_cli_version: "0.210.0"
```
#### allow all patch releases
```
bundle:
name: my-bundle
databricks_cli_version: "0.210.*"
```
#### constrain minimum version
```
bundle:
name: my-bundle
databricks_cli_version: ">= 0.210.0"
```
#### constrain range
```
bundle:
name: my-bundle
databricks_cli_version: ">= 0.210.0, <= 1.0.0"
```
For other examples see:
https://github.com/Masterminds/semver?tab=readme-ov-file#checking-version-constraints
Example error
```
sh-3.2$ databricks bundle validate
Error: Databricks CLI version constraint not satisfied. Required: >= 1.0.0, current: 0.216.0
```
## Tests
Added unit test cover all possible configuration permutations
---------
Co-authored-by: Lennart Kats (databricks) <lennart.kats@databricks.com>
## Changes
This PR fixes bundle schema being broken because `for_each_task: null`
was set in the generated schema. This is not valid according to the JSON
schema specification and thus the Red Hat YAML VSCode extension was
failing to parse the YAML configuration.
This PR fixes: https://github.com/databricks/cli/issues/1312
## Tests
The fix itself was tested manually. I asserted that the autocompletion
works now. This was mistakenly overlooked the first time around when the
regression was introduced in https://github.com/databricks/cli/pull/1204
because the YAML extension provides best-effort autocomplete suggestions
even if the JSON schema fails to load.
To prevent future regressions we also add a test to assert that the JSON
schema generated itself is a valid JSON schema object. This is done via
using the `ajv-cli` to validate the schema. This package is also used by
the Red Hat YAML extension and thus provides a high fidelity check for
ensuring the JSON schema is valid.
Before, with the old schema:
```
shreyas.goenka@THW32HFW6T cli-versions % ajv validate -s proj/schema-216.json -d ../bundle-playground-3/databricks.yml
schema proj/schema-216.json is invalid
error: schema is invalid: data/properties/resources/properties/jobs/additionalProperties/properties/tasks/items/properties/for_each_task must be object,boolean, data/properties/resources/properties/jobs/additionalProperties/properties/tasks/items must be array, data/properties/resources/properties/jobs/additionalProperties/properties/tasks/items must match a schema in anyOf
```
After, with the new schema:
```
shreyas.goenka@THW32HFW6T cli-versions % ajv validate -s proj/schema-dev.json -d ../bundle-playground-3/databricks.yml
../bundle-playground-3/databricks.yml valid
```
After, autocomplete suggestions:
<img width="600" alt="Screenshot 2024-03-27 at 6 35 57 PM"
src="https://github.com/databricks/cli/assets/88374338/d0a62402-e323-4f36-854d-332b33cbeab8">
## Changes
We no longer need to store load diagnostics on the `config.Root` type
itself and instead can return them from the `config.Load` call directly.
It is up to the caller of this function to append them to previous
diagnostics, if any.
Background: previous commits moved configuration loading of the entry
point into a mutator, so now all diagnostics naturally flow from
applying mutators.
This PR depends on #1319.
## Tests
Unit and manual validation of the debug statements in the validate
command.
## Changes
This PR introduces an allow list for resource types that are allowed
when the run_as for the bundle is not the same as the current deployment
user.
This PR also adds a test to ensure that any new resources added to DABs
will have to add the resource to either the allow list or add an error
to fail when run_as identity is not the same as deployment user.
## Tests
Unit tests
## Changes
Prior to this change, the bundle configuration entry point was loaded
from the function `bundle.Load`. Other configuration files were only
loaded once the caller applied the first set of mutators. This
separation was unnecessary and not ideal in light of gathering
diagnostics while loading _any_ configuration file, not just the ones
from the includes.
This change:
* Updates `bundle.Load` to only verify that the specified path is a
valid bundle root.
* Moves mutators that perform loading to `bundle/config/loader`.
* Adds a "load" phase that takes the place of applying
`DefaultMutators`.
Follow ups:
* Rename `bundle.Load` -> `bundle.Find` (because it no longer performs
loading)
This change depends on #1316 and #1317.
## Tests
Tests pass.
## Changes
PR #604 added functionality to load a bundle without a `databricks.yml`
if both the `DATABRICKS_BUNDLE_ROOT` and `DATABRICKS_BUNDLE_INCLUDES`
environment variables were set. We never ended up using this in
downstream tools so this can be removed.
## Tests
Unit tests pass.
## Changes
The bundle path was previously stored on the `config.Root` type under
the assumption that the first configuration file being loaded would set
it. This is slightly counterintuitive and we know what the path is upon
construction of the bundle. The new location for this property reflects
this.
## Tests
Unit tests pass.
## Changes
This diagnostics type allows us to capture multiple warnings as well as
errors in the return value. This is a preparation for returning
additional warnings from mutators in case we detect non-fatal problems.
* All return statements that previously returned an error now return
`diag.FromErr`
* All return statements that previously returned `fmt.Errorf` now return
`diag.Errorf`
* All `err != nil` checks now use `diags.HasError()` or `diags.Error()`
## Tests
* Existing tests pass.
* I confirmed no call site under `./bundle` or `./cmd/bundle` uses
`errors.Is` on the return value from mutators. This is relevant because
we cannot wrap errors with `%w` when calling `diag.Errorf` (like
`fmt.Errorf`; context in https://github.com/golang/go/issues/47641).
## Changes
These tests were located in `bundle/tests/bundle` which meant they were
unable to reuse the helper functions defined in the `bundle/tests`
package. There is no need for these tests to live outside the package.
## Tests
Existing tests pass.
## Changes
This change addresses the path resolution behavior in resource
definitions. Previously, all paths were resolved relative to where the
resource was first defined, which could lead to confusion and errors
when paths were specified in different directories. The new behavior is
to resolve paths relative to where they are defined, making it more
intuitive.
However, to avoid breaking existing configurations, compatibility with
the old behavior is maintained.
## Tests
* Existing unit tests for path translation pass.
* Additional test to cover both the nominal and the fallback behavior.
## Changes
CheckRunningResource does `terraform.Show` which (I believe) expects
valid `bundle.tf.json` which is only written as part of
`terraform.Write` later.
With this PR order is changed.
Fixes#1286
## Tests
Added regression E2E test
## Changes
This PR introduces new structure (and a file) being used locally and
synced remotely to Databricks workspace to track bundle deployment
related metadata.
The state is pulled from remote, updated and pushed back remotely as
part of `bundle deploy` command.
This state can be used for deployment sequencing as it's `Version` field
is monotonically increasing on each deployment.
Currently, it only tracks files being synced as part of the deployment.
This helps fix the issue with files not being removed during deployments
on CI/CD as sync snapshot was never present there.
Fixes#943
## Tests
Added E2E (regression) test for files removal on CI/CD
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
This PR:
1. Adds an integration test for mlops-stacks that checks the
initialization and deployment of the project was successful.
2. Fixes a bug in the initialization of templates from non-tty. We need
to process the input parameters in order since their descriptions can
refer to input parameters that came before in the interactive UX.
## Tests
The integration test passes in CI.
## Changes
We now keep location metadata associated with every configuration value.
When expanding globs for pipeline libraries, this annotation was erased
because of the conversion to/from the typed structure. This change
modifies the expansion mutator to work with `dyn.Value` and retain the
location of the value that holds the glob pattern.
## Tests
Unit tests pass.
## Changes
The databricks terraform provider does not allow changing permission of
the current user. Instead, the current identity is implictly set to be
the owner of all resources on the platform side.
This PR introduces a mutator to filter permissions from the bundle
configuration at deploy time, allowing users to define permissions for
their own identities in their bundle config.
This would allow configurations like, allowing both alice and bob to
collaborate on the same DAB:
```
permissions:
level: CAN_MANAGE
user_name: alice
level: CAN_MANAGE
user_name: bob
```
This PR is a reincarnation of
https://github.com/databricks/cli/pull/1145. The earlier attempt had to
be reverted due to metadata loss converting to and from the dynamic
configuration representation (reverted here:
https://github.com/databricks/cli/pull/1179)
## Tests
Unit test and manually
## Changes
This change means the callback supplied to `dyn.Foreach` can introspect
the path of the value it is being called for. It also prepares for
allowing visiting path patterns where the exact path is not known
upfront.
## Tests
Unit tests.
Check if `bundle.tf.json` doesn't exist and create it before executing
`terraform init` (inside `terraform.Load`)
Fixes a problem when during `terraform.Load` it fails with:
```
Error: Failed to load plugin schemas
Error while loading schemas for plugin components: Failed to obtain provider
schema: Could not load the schema for provider
registry.terraform.io/databricks/databricks: failed to instantiate provider
"registry.terraform.io/databricks/databricks" to obtain schema: unavailable
provider "registry.terraform.io/databricks/databricks"..
```
## Changes
Upgrade Terraform provider to 1.37.0
Currently we're using 1.36.2 version which uses Go SDK 0.30 which does
not have U2M enabled for all clouds.
Upgrading to 1.37.0 allows TF provider (and thus DABs) to use U2M
Fixes#1231
## Changes
Currently, when the CLI run a list API call (like list jobs), it uses
the `List*All` methods from the SDK, which list all resources in the
collection. This is very slow for large collections: if you need to list
all jobs from a workspace that has 10,000+ jobs, you'll be waiting for
at least 100 RPCs to complete before seeing any output.
Instead of using List*All() methods, the SDK recently added an iterator
data structure that allows traversing the collection without needing to
completely list it first. New pages are fetched lazily if the next
requested item belongs to the next page. Using the List() methods that
return these iterators, the CLI can proactively print out some of the
response before the complete collection has been fetched.
This involves a pretty major rewrite of the rendering logic in `cmdio`.
The idea there is to define custom rendering logic based on the type of
the provided resource. There are three renderer interfaces:
1. textRenderer: supports printing something in a textual format (i.e.
not JSON, and not templated).
2. jsonRenderer: supports printing something in a pretty-printed JSON
format.
3. templateRenderer: supports printing something using a text template.
There are also three renderer implementations:
1. readerRenderer: supports printing a reader. This only implements the
textRenderer interface.
2. iteratorRenderer: supports printing a `listing.Iterator` from the Go
SDK. This implements jsonRenderer and templateRenderer, buffering 20
resources at a time before writing them to the output.
3. defaultRenderer: supports printing arbitrary resources (the previous
implementation).
Callers will either use `cmdio.Render()` for rendering individual
resources or `io.Reader` or `cmdio.RenderIterator()` for rendering an
iterator. This separate method is needed to safely be able to match on
the type of the iterator, since Go does not allow runtime type matches
on generic types with an existential type parameter.
One other change that needs to happen is to split the templates used for
text representation of list resources into a header template and a row
template. The template is now executed multiple times for List API
calls, but the header should only be printed once. To support this, I
have added `headerTemplate` to `cmdIO`, and I have also changed
`RenderWithTemplate` to include a `headerTemplate` parameter everywhere.
## Tests
- [x] Unit tests for text rendering logic
- [x] Unit test for reflection-based iterator construction.
---------
Co-authored-by: Andrew Nester <andrew.nester@databricks.com>
## Changes
This change enables the use of bundle variables for boolean, integer,
and floating point fields.
## Tests
* Unit tests.
* I ran a manual test to confirm parameterizing the number of workers in
a cluster definition works.
Andrew Nester
Lennart Kats (databricks)
dependabot[bot]
shreyas-goenka
Gleb Kanterov
Pieter Noordhuis
Ilia Babanov
Miles Yucht