## Changes
Fix all errcheck-found issues in tests and test helpers. Mostly this
done by adding require.NoError(t, err), sometimes panic() where t object
is not available).
Initial change is obtained with aider+claude, then manually reviewed and
cleaned up.
## Tests
Existing tests.
## Changes
This field was special-cased in #1307 because it's not part of the JSON
payload in the SDK struct.
This approach, while pragmatic, meant it didn't show up in the JSON
schema. While debugging an issue with quality monitors in #1900, I
couldn't figure out why I was getting schema errors on this field, or
how it was passed through to the TF representation. This commit removes
the special case and makes it behave like everything else.
## Tests
* Unit tests pass.
* Confirmed that the updated schema failed validation before this
change.
## Changes
The issue reported in #1828 illustrates how using a YAML timestamp-like
value (a date in this case) causes an issue during conversion to and
from the typed configuration tree.
We use the `AsAny()` function on the `dyn.Value` when normalizing for
the `any` type. We only use the `any` type for variable values, because
they can assume every type. The `AsAny()` function returns a `time.Time`
for the time value during conversion **to** the typed configuration
tree. Upon conversion **from** the typed configuration tree back into
the dynamic configuration tree, we cannot distinguish a `time.Time`
struct from any other struct.
To address this, we use the underlying string value of the time value
when we normalize for the `any` type.
Fixes#1828.
## Tests
Existing unit tests pass
## Changes
Added JSON input validation for CLI commands. Now when invalid JSON
passed as a payload to CLI commands, CLI performs input normalisation
and detects if there are any mismatches such as incorrect types, unknown
fields and etc.
This diagnostic information is printed in standard error output and does
not block command execution, so the change is backward compatible.
Fixes#1769#1764#1625#1560
## Tests
Added unit tests
```
andrew.nester@HFW9Y94129 ~ % databricks jobs create --json '{"seeti}'
Error: error decoding JSON at (inline):1:2: unexpected EOF
andrew.nester@HFW9Y94129 ~ % databricks jobs create --json '{"seeti": true}'
Warning: unknown field: seeti
in (inline):1:9
Error: Job settings must be specified.
```
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
If not explicitly quoted, the YAML loader interprets a value like
`2024-08-29` as a timestamp. Such a value is usually intended to be a
string instead. Our normalization logic was not able to turn a time
value back into the original string.
This change boxes the time value to include its original string
representation. Normalization of one of these values into a string can
now use the original input value.
## Tests
Unit tests in `libs/dyn/convert`.
## Changes
Since locations are already tracked in the dynamic value tree, we no
longer need to track it at the resource/artifact level. This PR:
1. Removes use of `paths.Paths`. Uses dyn.Location instead.
2. Refactors the validation of resources not being empty valued to be
generic across all resource types.
## Tests
Existing unit tests.
## Changes
Some diagnostics can have multiple paths associated with them. For
instance, ensuring that unique resource keys are used across all
resources. This PR extends `diag.Diagnostic` to accept multiple paths.
This PR is symmetrical to
https://github.com/databricks/cli/pull/1610/files
## Tests
Unit tests
## Changes
This PR changes `diag.Diagnostics` to allow including multiple locations
associated with the diagnostic message. The diagnostics that now return
multiple locations with this PR are:
1. Warning for unknown keys in config.
2. Use of experimental.run_as
3. Accidental sync.exludes that exclude all files.
## Tests
Existing unit tests pass. New unit test case to assert on error message
when multiple locations are included.
Example output:
```
➜ bundle-playground-2 ~/cli2/cli/cli bundle validate
Warning: You are using the legacy mode of run_as. The support for this mode is experimental and might be removed in a future release of the CLI. In order to run the DLT pipelines in your DAB as the run_as user this mode changes the owners of the pipelines to the run_as identity, which requires the user deploying the bundle to be a workspace admin, and also a Metastore admin if the pipeline target is in UC.
at experimental.use_legacy_run_as
in resources.yml:10:22
databricks.yml:13:22
Name: fix run_if
Target: default
Workspace:
User: shreyas.goenka@databricks.com
Path: /Users/shreyas.goenka@databricks.com/.bundle/fix run_if/default
Found 1 warning
```
## Changes
This PR changes the location metadata associated with a `dyn.Value` to a
slice of locations. This will allow us to keep track of location
metadata across merges and overrides.
The convention is to treat the first location in the slice as the
primary location. Also, the semantics are the same as before if there's
only one location associated with a value, that is:
1. For complex values (maps, sequences) the location of the v1 is
primary in Merge(v1, v2)
2. For primitive values the location of v2 is primary in Merge(v1, v2)
## Tests
Modifying existing merge unit tests. Other existing unit tests and
integration tests pass.
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
This PR makes two changes:
1. In https://github.com/databricks/cli/pull/1510 we'll be adding
multiple associated location metadata with a dyn.Value. The Go compiler
does not allow comparing structs if they contain slice values
(presumably due to multiple possible definitions for equality). In
anticipation for adding a `[]dyn.Location` type field to `dyn.Value`
this PR removes all direct comparisons of `dyn.Value` and instead relies
on the kind.
2. Retain location metadata for values in convert.FromTyped. The change
diff is exactly the same as https://github.com/databricks/cli/pull/1523.
It's been combined with this PR because they both depend on each other
to prevent test failures (forming a test failure deadlock).
Go patch used:
```
@@
var x expression
@@
-x == dyn.InvalidValue
+x.Kind() == dyn.KindInvalid
@@
var x expression
@@
-x != dyn.InvalidValue
+x.Kind() != dyn.KindInvalid
@@
var x expression
@@
-x == dyn.NilValue
+x.Kind() == dyn.KindNil
@@
var x expression
@@
-x != dyn.NilValue
+x.Kind() != dyn.KindNil
```
## Tests
Unit tests and integration tests pass.
## Changes
Added support for complex variables
Now it's possible to add and use complex variables as shown below
```
bundle:
name: complex-variables
resources:
jobs:
my_job:
job_clusters:
- job_cluster_key: key
new_cluster: ${var.cluster}
tasks:
- task_key: test
job_cluster_key: key
variables:
cluster:
description: "A cluster definition"
type: complex
default:
spark_version: "13.2.x-scala2.11"
node_type_id: "Standard_DS3_v2"
num_workers: 2
spark_conf:
spark.speculation: true
spark.databricks.delta.retentionDurationCheck.enabled: false
```
Fixes#1298
- [x] Support for complex variables
- [x] Allow variable overrides (with shortcut) in targets
- [x] Don't allow to provide complex variables via flag or env variable
- [x] Fail validation if complex value is used but not `type: complex`
provided
- [x] Support using variables inside complex variables
## Tests
Added unit tests
---------
Co-authored-by: shreyas-goenka <88374338+shreyas-goenka@users.noreply.github.com>
## Changes
This reverts commit dac5f09556 (#1523).
Retaining the location for nil values means equality checks no longer
pass.
We need #1520 to be merged first.
## Tests
Integration test `TestAccPythonWheelTaskDeployAndRunWithWrapper`.
## Changes
There are four different treatments location metadata can receive in the
`convert.FromTyped` method.
1. Location metadata is **retained** for maps, structs and slices if the
value is **not nil**
2. Location metadata is **lost** for maps, structs and slices if the
value is **is nil**
3. Location metadata is **retained** if a scalar type (eg. bool, string
etc) does not change.
4. Location metadata is **lost** if the value for a scalar type changes.
This PR ensures that location metadata is not lost in any case; that is,
it's always preserved.
For (2), this serves as a bug fix so that location information is not
lost on conversion to and from typed for nil values of complex types
(struct, slices, and maps).
For (4) this is a change in semantics. For primitive values modified in
a `typed` mutator, any references to `.Location()` for computed
primitive fields will now return associated YAML location metadata (if
any) instead of an empty location.
While arguable, these semantics are OK since:
1. Situations like these will be rare.
2. Knowing the YAML location (if any) is better than not knowing the
location at all. These locations are typically visible to the user in
errors and warnings.
## Tests
Unit tests
## Changes
When a configuration defines:
```yaml
run_as:
```
It first showed up as `run_as -> nil` in the dynamic configuration only
to later be converted to `run_as -> {}` while going through typed
conversion. We were using the presence of a key to initialize an empty
value. This is incorrect and it should have remained a nil value.
This conversion was happening in `convert.FromTyped` where any struct
always returned a map value. Instead, it should only return a map value
in any one of these cases: 1) the struct has elements, 2) the struct was
originally a map in the dynamic configuration, or 3) the struct was
initialized to a non-empty pointer value.
Stacked on top of #1516 and #1518.
## Tests
* Unit tests pass.
* Integration tests pass.
* Manually ran through bundle CRUD with a bundle without resources.
## Changes
This came up in integration testing for #1511. One of the tests
converted a `map[string]any` to a dynamic value and encountered a `nil`
and errored out. We can safely return a nil in this case.
## Tests
Unit test passes.
## Changes
Previously, the functions `Get` and `Index` returned `dyn.NilValue` to
indicate that a map key or sequence index wasn't found. This is a valid
value, so we need to differentiate between actual absence and a real
`dyn.NilValue`. We do this with the zero value of a `dyn.Value` (also
captured in the constant `dyn.InvalidValue`).
## Tests
* Unit tests.
* Renamed `Get` and `Index` to find and update all call sites.
## Changes
This change adds support for Lakehouse monitoring in bundles.
The associated resource type name is "quality monitor".
## Testing
Unit tests.
---------
Co-authored-by: Pieter Noordhuis <pcnoordhuis@gmail.com>
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
Co-authored-by: Arpit Jasapara <87999496+arpitjasa-db@users.noreply.github.com>
## Changes
This PR also fixes empty values variable overrides using the --var flag.
Now, using `--var="my_variable="` will set the value of `my_variable` to
the empty string instead of ignoring the flag altogether.
## Tests
The change using a unit test. Manually verified the `--var` flag works
now.
## Changes
We currently issue a warning if an integer is used where a floating
point number is expected. But if they are convertible, we should convert
and not issue a warning. This change fixes normalization if they are
convertible between each other. We still produce a warning if the type
conversion leads to a loss in precision.
## Tests
Unit tests pass.
## Changes
In 0.217.0 we started to emit warning on unknown fields in YAML
configuration but wrongly considered YAML anchor blocks as unknown
field.
This PR fixes this by skipping normalising of YAML blocks.
## Tests
Added regression tests
## Changes
Errors in normalization mean hard failure as of #1319.
We currently allow malformed configurations and ignore the malformed
fields and should continue to do so.
## Tests
* Tests pass.
* No calls to `diag.Errorf` from `libs/dyn`
## Changes
This adds context to warnings and errors. For example:
* Summary: `unknown field bar`
* Location: `foo.yml:6:10`
* Path: `.targets.dev.workspace`
## Tests
Unit tests.
## Changes
It's not necessary to error out if a configuration field is present but
not set.
For example, the following would error out, but after this change only
produces a warning:
```yaml
workspace:
# This is a string field, but if not specified, it ends up being a null.
host:
```
## Tests
Updated the unit tests to match the new behavior.
---------
Co-authored-by: shreyas-goenka <88374338+shreyas-goenka@users.noreply.github.com>
## Changes
Before this change maps were stored as a regular Go map with string
keys. This didn't let us capture metadata (location information) for map
keys.
To address this, this change replaces the use of the regular Go map with
a dedicated type for a dynamic map. This type stores the `dyn.Value` for
both the key and the value. It uses a map to still allow O(1) lookups
and redirects those into a slice.
## Tests
* All existing unit tests pass (some with minor modifications due to
interface change).
* Equality assertions with `assert.Equal` no longer worked because the
new `dyn.Mapping` persists the order in which keys are set and is
therefore susceptible to map ordering issues. To fix this, I added a
`dynassert` package that forwards all assertions to `testify/assert` but
intercepts equality for `dyn.Value` arguments.
## Changes
This change enables the use of bundle variables for boolean, integer,
and floating point fields.
## Tests
* Unit tests.
* I ran a manual test to confirm parameterizing the number of workers in
a cluster definition works.
## Changes
This is a follow-up to #1211 prompted by the addition of a recursive
type in the Go SDK v0.31.0 (`jobs.ForEachTask`).
When populating missing fields with their zero values we must not
inadvertently recurse into a recursive type.
## Tests
New unit test fails with a stack overflow if the fix if the check is
disabled.
## Changes
This feature supports variable lookups in a `dyn.Value` that are present
in the type but haven't been initialized with a value.
For example: `${bundle.git.origin_url}` is present in the `dyn.Value`
only if it was assigned a value. If it wasn't assigned a value it should
resolve to the empty string. This normalization option, when set,
ensures that all fields that are represented in the specified type are
present in the return value.
This change is in support of #1098.
## Tests
Added unit test.
## Changes
Before this change, any error in a subtree would cause the entire
subtree to be dropped from the output.
This is not ideal when debugging, so instead we drop only the values
that cannot be normalized. Note that this doesn't change behavior if the
caller is properly checking the returned diagnostics for errors.
Note: this includes a change to use `dyn.InvalidValue` as opposed to
`dyn.NilValue` when returning errors.
## Tests
Added unit tests for the case where nested struct, map, or slice
elements contain an error.
## Changes
Not doing this means that the output struct is not a true representation
of the `dyn.Value` and unrepresentable state (e.g. unexported fields)
can be carried over across `convert.ToTyped` calls.
## Tests
Unit tests.
## Changes
This was an issue in cases where the typed structure contains a non-nil
pointer to an empty struct. After conversion to a `dyn.Value` and back
to the typed structure, the pointer became nil.
## Tests
Unit tests.
## Changes
In the dynamic configuration, the nil value (dyn.NilValue) denotes a
value that should not be serialized, ie a value being nil is the same as
it not existing in the first place.
This is not true for zero values in maps and slices. This PR fixes the
conversion from typed values to dyn.Value, to treat zero values in maps
and slices as zero and not nil.
## Tests
Unit tests
## Changes
The name "dynamic value", or "dyn" for short, is more descriptive than
the opaque "config". Also, it conveniently does not alias with other
packages in the repository, or (popular ones) elsewhere.
(discussed with @andrewnester)
## Tests
n/a
Denis Bilenko
Pieter Noordhuis
Andrew Nester
shreyas-goenka
Aravind Segu