## Changes
- New test covering failures in reading .git. One case results in error,
some result in warning (not shown).
- New helper withdir runs commands in a subdirectory.
## Tests
New acceptance test.
## Changes
- Acceptance tests load test.toml to configure test behaviour.
- If file is not found in the test directory, parents are searched,
until the test root.
- Currently there is one option: runtime.GOOS to switch off tests per
OS.
## Tests
Using it in https://github.com/databricks/cli/pull/2223 to disable test
on Windows that cannot be run there.
## Changes
When adding path, a few things should take care of:
- symlink expansion
- forward/backward slashes, so that tests could do sed 's/\\\\/\//g' to
make it pass on Windows (see
acceptance/bundle/syncroot/dotdot-git/script)
SetPath() function takes care of both.
This PR uses SetPath() on all paths consistently.
## Tests
Existing tests.
## Changes
New source of default values for variables - variable file
`.databricks/bundle/<target>/variable-overrides.json`
CLI tries to stat and read that file every time during variable
initialisation phase
<!-- Summary of your changes that are easy to understand -->
## Tests
Acceptance tests
## Changes
`include` section is used only to include other bundle configuration
YAML files. If any other file type is used, raise an error and guide
users to use `sync.include` instead
## Tests
Added acceptance test
---------
Co-authored-by: Julia Crawford (Databricks) <julia.crawford@databricks.com>
## Changes
If there are unreadable files in a directory, raise an error but
continue with further diagnostics, because the answer is in the script
output.
## Tests
Manually - I'm working on some tests that create unreadable files, the
report is much better with this change.
## Changes
If git is not detected, set default worktree root to sync root.
Otherwise NewFileSet/View raise an error about worktree root being
outside view root in acceptance/bundle/sync-paths-dotdot.
This behavior is introduced in
https://github.com/databricks/cli/pull/1945
Stacked on https://github.com/databricks/cli/pull/2202
## Tests
Existing tests.
- Move acceptance/bundle/sync-paths-dotdot test to
acceptance/bundle/syncroot/dotdot-notgit
- Add new test acceptance/bundle/syncroot/dotdot-git
Fix replacer to work with this test and on Windows:
- Make PATH work on Windows by using EvalSymlinks.
- Make concatenated path match within JSON but stripping quotes.
## Changes
- If you pass -inprocess flag to acceptance tests, they will run in the
same process as test itself. This enables debugging.
- If you set singleTest variable on top of acceptance_test.go, you'll
only run that test and with inprocess mode. This is intended for
debugging in VSCode.
- (minor) Converted KeepTmp to flag -keeptmp from env var KEEP_TMP for
consistency with other flags.
## Tests
- I verified that acceptance tests pass with -inprocess mode: `go test
-inprocess < /dev/null | cat`
- I verified that debugging in VSCode works: set a test name in
singleTest variable, set breakpoints inside CLI and click "debug test"
in VSCode.
## Changes
- Add a new method Clone() on ReplacementContext
- Use it when passing common replacements to test cases.
## Tests
Manually. I have a different branch where this bug manifested and this
change helped.
Based on integration test from @andrewnester in #2194
Manually checked that this databricks.yml passes validation on v0.235.0
but fails on v0.236.0, very like it was broken in
https://github.com/databricks/cli/pull/1945
This also adds replacements for tmpdir, it's parent and (just in case)
grand parent.
## Changes
This is not needed because the command group is already returned by
`workspace.All()`.
The additional command registration was added in #1679.
## Tests
Acceptance test.
## Changes
Add experimental-jobs-as-code template allowing defining jobs using
Python instead of YAML through the `databricks-bundles` PyPI package.
## Tests
Manually and acceptance tests.
## Changes
Include a materialized copy of built-in templates as reference output.
This updates the output comparison logic to work against an output
directory. The `doComparison` function now always works on real files.
It can now tell apart non-existing files and empty files (e.g., the
`.gitkeep` files in templates).
## Changes
This includes a change to the defaults for the output directory flags of
the "generate" commands. These defaults included the expanded working
directory. This can be omitted because it is implied.
## Changes
The assertions on the output made are now captured in the `output.*`
files. These don't capture intent like actual assertions do, but we
still have regular test coverage in the path translation tests under
`bundle/config/mutator`.
## Tests
Tests pass.
## Changes
The materialized templates included in #2146 include Python code that we
require to be formatted. Instead of running ruff as part of the
testcase, we can enforce that all Python code in the repository is
formatted. It won't be possible to have a passing acceptance test for
template initialization with unformatted code.
## Changes
- Instead of doing 2 passes on variable resolution, do a loop until
there are no more updates (or we reach count 100).
- Stacked on top of #2163 which is a regression test for this:
acceptance/bundle/variables/complex-transitive-deep
## Tests
Existing tests, new regression tests.
These tests already passed before, added for completeness:
- acceptance/bundle/variables/cycle
- acceptance/bundle/variables/complex-cross-ref
Follow up to #2157. That PR repeated variable resolution. This test
still does not resolve fully but would resolve with 3 passes. This is
slightly different from complex-transitive-deeper - this test does not
show any errors, the issue is purely not enough passes.
## Changes
- Remove ResolveVariableReferencesInComplexVariables - it blocked
complex-within-complex for no good reason.
- Repeat regular resolution twice, it helps with a couple test cases we
have.
There may be a case for running it 3 times or more in a loop, but there
is no test case for that, so this PR is simple incremental improvement.
## Tests
Existing acceptance tests. Previously all unit tests for complex
variables were converted to acceptance tests, to capture this change and
ensure nothing breaks.
## Changes
It covers both https://$DATABRICKS_HOST and http://$DATABRICKS_HOST so
the test output does not change between local and the cloud.
## Tests
Existing tests using golden files (acceptance and integration) catch
this and were updated.
## Changes
Replacement was split between the type `ReplacementContext` and the
`ReplaceOutput` function. The latter also ran a couple of regular
expressions. This change consolidates them such that it is up to the
caller to compose the set of replacements to use.
This change is required to accommodate UUID replacement in #2146.
This test checks load git details functionality + variable interpolation
there.
The variables are not working there because LoadGitDetails mutator is
running before variable interpolation.
Additionally, correctly replace tmp path that is used for DATABRICKS_TF_EXEC_PATH
## Changes
Use name format "TestAccept/bundle/variables/host" (previously slashes
were reversed on Windows).
## Tests
Manually run "go test ./acceptance -v -run
TestAccept/bundle/variables/host" in Windows VM.
## Changes
To accommodate:
* Add the server URL to the set of output replacements
* Include a call to the permissions API to the dummy server
* Run the main script in a subshell to isolate working directory changes
## Changes
Add two new make commands:
- make acc-cover: runs acceptance tests and outputs
coverage-acceptance.txt
- make acc-showcover: show coverage-acceptance.txt locally in browser
Using the GOCOVERDIR functionality:
https://go.dev/blog/integration-test-coverage
This works, but there are a couple of issues encountered:
- GOCOVERDIR does not play well with regular "go test -cover". Once this
fixed, we can simplify the code and have 'make cover' output coverage
for everything at once. We can also probably get rid of CLI_GOCOVERDIR.
https://github.com/golang/go/issues/66225
- When running tests in parallel to the same directory there is rare
conflict on writing covmeta file. For this reason each tests writes
coverage to their own directory which is then merged together by 'make
acc-cover'.
<!-- Summary of your changes that are easy to understand --
## Tests
Manually running the new make commands.
## Changes
- If CLOUD_ENV variable is set, acceptance will no longer set up server
& override DATABRICKS_HOST/DATABRICKS_TOKEN/HOME env vars.
- I've updated replacements logic in testdiff to use tester /
tester@databricks.com convention.
## Tests
Manually running current acceptance tests against dogfood on my laptop I
get all test pass except for 2 failures.
```
--- FAIL: TestAccept/bundle/variables/env_overrides (0.09s)
--- FAIL: TestAccept/bundle/variables/resolve-builtin (1.30s)
```
## Changes
Move mutator.Merge{JobClusters,JobParameters,JobTasks,PipelineClusters}
after variable resolution. This helps with the case when key contains a
variable.
@pietern mentioned here
https://github.com/databricks/cli/pull/2101#pullrequestreview-2539168762
it should be safe.
## Tests
Existing acceptance that was capturing the bug is updated with corrected
output.
## Changes
Previously diagnostics were not seen in JSON output mode. This change
prints them to stderr.
This also fixes acceptance tests to preprocess all output with
s/execPath/$CLI/ not just output.txt.
## Tests
Existing acceptance tests. In one case I've added non-json command to
check that they match in output.
Denis Bilenko
shreyas-goenka
Ilya Kuznetsov
Andrew Nester
Pieter Noordhuis
Gleb Kanterov