## Changes
Update the output of the `deploy` command to be more concise and
consistent:
```
$ databricks bundle deploy
Building my_project...
Uploading my_project-0.0.1+20231207.205106-py3-none-any.whl...
Uploading bundle files to /Users/lennart.kats@databricks.com/.bundle/my_project/dev/files...
Deploying resources...
Updating deployment state...
Deployment complete!
```
This does away with the intermediate success messages, makes consistent
use of `...`, and only prints the success message at the very end after
everything is completed.
Below is the original output for comparison:
```
$ databricks bundle deploy
Detecting Python wheel project...
Found Python wheel project at /tmp/output/my_project
Building my_project...
Build succeeded
Uploading my_project-0.0.1+20231207.205134-py3-none-any.whl...
Upload succeeded
Starting upload of bundle files
Uploaded bundle files at /Users/lennart.kats@databricks.com/.bundle/my_project/dev/files!
Starting resource deployment
Resource deployment completed!
```
## Changes
Notifications weren't passed along because of a plural vs singular
mismatch.
## Tests
* Added unit test coverage.
* Manually confirmed it now works in an example bundle.
## Changes
A bug in the code that pulls the remote state could cause the local
state to be empty instead of a copy of the remote state. This happened
only if the local state was present and stale when compared to the
remote version.
We correctly checked for the state serial to see if the local state had
to be replaced but didn't seek back on the remote state before writing
it out. Because the staleness check would read the remote state in full,
copying from the same reader would immediately yield an EOF.
## Tests
* Unit tests for state pull and push mutators that rely on a mocked
filer.
* An integration test that deploys the same bundle from multiple paths,
triggering the staleness logic.
Both failed prior to the fix and now pass.
## Changes
It appears that `USERPROFILE` env variable indicates where Azure CLI
stores configuration data (aka `.azure` folder).
https://learn.microsoft.com/en-us/cli/azure/azure-cli-configuration#cli-configuration-file
Passing it to terraform executable allows it to correctly authenticate
using Azure CLI.
Fixes#983
## Tests
Ran deployment on Window VM before and after the fix.
## Changes
Some test call sites called directly into the mutator's `Apply` function
instead of `bundle.Apply`. Calling into `bundle.Apply` is preferred
because that's where we can run pre/post logic common across all
mutators.
## Tests
Pass.
## Changes
All calls to apply a mutator must go through `bundle.Apply`. This
conflicts with the existing use of the variable `bundle`. This change
un-aliases the variable from the package name by renaming all variables
to `b`.
## Tests
Pass.
## Changes
This PR fixes metadata computation for empty bundle. Before we would
error because the `terraform.Load()` mutator errors on a empty / no
state file.
## Tests
Failing integration tests now pass.
## Changes
This PR sets "resource" to nil in the terraform representation if no
resources are defined in the bundle configuration. This solves two
problems:
1. Makes bundle deploy work without any resources specified.
2. Previously if a `resources` block was removed after a deployment,
that would fail with an error. Now the resources would get destroyed as
expected.
Also removes `TerraformHasNoResources` which is no longer needed.
## Tests
New e2e tests.
## Changes
There are a couple places throughout the code base where interaction
with environment variables takes place. Moreover, more than one of these
would try to read a value from more than one environment variable as
fallback (for backwards compatibility). This change consolidates those
accesses.
The majority of diffs in this change are mechanical (i.e. add an
argument or replace a call).
This change:
* Moves common environment variable lookups for bundles to
`bundles/env`.
* Adds a `libs/env` package that wraps `os.LookupEnv` and `os.Getenv`
and allows for overrides to take place in a `context.Context`. By
scoping overrides to a `context.Context` we can avoid `t.Setenv` in
testing and unlock parallel test execution for integration tests.
* Updates call sites to pass through a `context.Context` where needed.
* For bundles, introduces `DATABRICKS_BUNDLE_ROOT` as new primary
variable instead of `BUNDLE_ROOT`. This was the last environment
variable that did not use the `DATABRICKS_` prefix.
## Tests
Unit tests pass.
## Changes
Close local Terraform state file when pushing to remote
Should help fix E2E test cleanup
```
testing.go:1225: TempDir RemoveAll cleanup: remove
C:\Users\RUNNER~1\AppData\Local\Temp\TestAccPythonWheelTaskDeployAndRun1395546390\001\.databricks\bundle\default\terraform\terraform.tfstate:
The process cannot access the file because it is being used by another process.
```
## Changes
Added end-to-end test for deploying and running Python wheel task
## Tests
Test successfully passed on all environments, takes about 9-10 minutes
to pass.
```
Deleted snapshot file at /var/folders/nt/xjv68qzs45319w4k36dhpylc0000gp/T/TestAccPythonWheelTaskDeployAndRun1845899209/002/.databricks/bundle/default/sync-snapshots/1f7cc766ffe038d6.json
Successfully deleted files!
2023/09/06 17:50:50 INFO Releasing deployment lock mutator=destroy mutator=seq mutator=seq mutator=deferred mutator=lock:release
--- PASS: TestAccPythonWheelTaskDeployAndRun (508.16s)
PASS
coverage: 77.9% of statements in ./...
ok github.com/databricks/cli/internal/bundle 508.810s coverage: 77.9% of statements in ./...
```
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Another example of singular/plural conversion.
Longer term solution is we do a full sweep of the type using reflection
to make sure we cover all fields.
## Tests
Unit test passes.
## Changes
This follows up on https://github.com/databricks/cli/pull/686. This PR
makes our stubs optional + it adds DLT stubs:
```
$ databricks bundle init
Template to use [default-python]: default-python
Unique name for this project [my_project]: my_project
Include a stub (sample) notebook in 'my_project/src' [yes]: yes
Include a stub (sample) DLT pipeline in 'my_project/src' [yes]: yes
Include a stub (sample) Python package 'my_project/src' [yes]: yes
✨ Successfully initialized template
```
## Tests
Manual testing, matrix tests.
---------
Co-authored-by: Andrew Nester <andrew.nester@databricks.com>
Co-authored-by: PaulCornellDB <paul.cornell@databricks.com>
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
This is necessary to ensure that our Terraform provider can use the same
auxiliary programs (e.g. `az`, or `gcloud`) as the CLI.
## Tests
Unit test and manual verification.
## Changes
The installer doesn't respect the version constraints if they are
specified.
Source: [the vc argument is not
used](850464c601/releases/latest_version.go (L158-L177)).
## Tests
Confirmed manually.
## Changes
Renamed Environments to Targets in bundle.yml.
The change is backward-compatible and customers can continue to use
`environments` in the time being.
## Tests
Added tests which checks that both `environments` and `targets` sections
in bundle.yml works correctly
## Changes
Prompt UI glitches often. We are switching to a custom implementation of
a simple prompter which is much more stable.
This also allows new lines in prompts which has been an ask by the
mlflow team.
## Tests
Tested manually
## Changes
Propagate `TF_CLI_CONFIG_FILE` env variable.
From Terraform documentation:
> The location of the Terraform CLI configuration file can also be
specified using the TF_CLI_CONFIG_FILE [environment
variable](https://developer.hashicorp.com/terraform/cli/config/environment-variables)
It allows using custom builds of terraform-provider-databricks, using
config files like:
```tf
provider_installation {
dev_overrides {
"databricks/databricks" = "/Users/gleb.kanterov/terraform-provider-databricks"
}
direct {}
}
```
## Tests
I added unit tests.
## Changes
The pattern `errors.Is(err, fs.ErrNotExist)` is common to check for an
error type.
Errors can implement `Is(error) bool` with a custom equivalence checker.
## Tests
New asserts all pass in the integration test.
## Changes
On Unix systems, the default of `/tmp` always works. No need to
synthesize a path for it.
The custom TMPDIR was causing issues when used from GitHub Actions
runners.
## Tests
Confirmed manually this fixes the issue on GitHub Actions runners.
## Changes
Added support for `bundle.Seq`, simplified `Mutator.Apply` interface by
removing list of mutators from return values/
## Tests
1. Ran `cli bundle deploy` and interrupted it with Cmd + C mid execution
so lock is not released
2. Ran `cli bundle deploy` top make sure that CLI is not trying to
release lock when it fail to acquire it
```
andrew.nester@HFW9Y94129 multiples-tasks % cli bundle deploy
Starting upload of bundle files
Uploaded bundle files at /Users/andrew.nester@databricks.com/.bundle/simple-task/development/files!
^C
andrew.nester@HFW9Y94129 multiples-tasks % cli bundle deploy
Error: deploy lock acquired by andrew.nester@databricks.com at 2023-05-24 12:10:23.050343 +0200 CEST. Use --force to override
```
## Changes
Passes through tmp dir related env vars to the terraform process. Incase
any of them are not set, we assign temp dir inside bundle cache dir as
the location terraform should use.
## Tests
Manually checked that these env vars do override location where
os.CreateTemp files are created
## Changes
Rename all instances of "bricks" to "databricks".
## Tests
* Confirmed the goreleaser build works, uses the correct new binary
name, and produces the right archives.
* Help output is confirmed to be correct.
* Output of `git grep -w bricks` is minimal with a couple changes
remaining for after the repository rename.
## Changes
When local state file exists it won't be override by remote state file
## Tests
Running `bricks bundle deploy` after state push failed does not override
local state file
Use cases verified:
1. Local state file is newer than remote
2. Local state file is older than remote
3. Local state file does not exist
4. Local state file corrupted
## Changes
Improved error message when 'bricks bundle run' is executed before
'bricks bundle deploy'
The error happens when we attempt to load terraform state when it does
not exist.
The best way to check if terraform state actually exists is to call
`terraform show -json` and that's what already happens here
https://github.com/databricks/bricks/compare/main...error-before-deploy#diff-8c50f8c04e568397bc865b7e02d1f4ec5b18379d8d32daddfeb041035d804f5fL28
Absence of `state.Values` indicates that there is no state and likely
bundle was just never deployed.
## Tests
Ran `bricks bundle run test_job` on a new non-deployed bundle.
**Output:**
`Error: terraform show: No state. Did you forget to run 'bricks bundle
deploy'?`
Running `bricks bundle deploy && bricks bundle run test_job` succeeds.
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Adds a IsInplaceSupported() function to the event interface. Any event
that now uses the progress logger has to declare whether they support in
place logging
## Tests
Manually
## Changes
These are unlikely to ever be DBFS paths so we can remove this level of indirection to simplify.
**Note:** this is a breaking change. Downstream usage of these fields must be updated.
## Tests
Existing tests pass.
## Changes
This is useful when developing the Databricks Terraform provider where
you keep a local-only build of the provider and refer to it using $HOME
from `~/.terraformrc`, for example like this:
```
plugin_cache_dir = "$HOME/.terraform.d/plugin-cache"
```
## Tests
That $HOME is passed through cannot be tested as is because the
`tfexec.Terraform` struct doesn't expose it through public fields or
methods. What can be tested is a successful run of the initialize
mutator and this is included in this commit.
## Changes
Pull state before deploying and push state after deploying.
Note: the run command was missing mutators to initialize Terraform. This
is necessary if the cache directory is removed between running "deploy"
and "run" (which is valid now that we synchronize state).
## Tests
Manually.
## Changes
The databricks_permissions resource may be generated if a bundle
resource includes a `permissions` block. There's no need to incorporate
details from the materialization into the bundle configuration struct.
## Tests
Confirmed that this fixes `bricks bundle run` when dealing with a bundle
with permission configuration.
## Changes
Auth relied on setting a profile. In this change we enumerate all
configuration properties and export all non-empty ones as a map with
environment variables. We then pass this map to the Terraform execution
wrapper.
This results in Terraform using the bundle's authentication
configuration.
This change is needed to make #287 work.
## Tests
Manually.
Users can opt out and use the system-installed version with the
following configuration:
```
bundle:
terraform:
exec_path: terraform
```
This will find the binary in $PATH and replace it with the found value.
If this is not set, the initialize phase will install Terraform in the
bundle's cache directory.
Lennart Kats (databricks)
Pieter Noordhuis
Andrew Nester
shreyas-goenka
Arpit Jasapara
dependabot[bot]
Gleb Kanterov
Serge Smertin