## Changes
This pull request extends the templating support in preparation of a
new, default template (WIP, https://github.com/databricks/cli/pull/686):
* builtin templates that can be initialized using e.g. `databricks
bundle init default-python`
* builtin templates are embedded into the executable using go's `embed`
functionality, making sure they're co-versioned with the CLI
* new helpers to get the workspace name, current user name, etc. help
craft a complete template
* (not enabled yet) when the user types `databricks bundle init` they
can interactively select the `default-python` template
And makes two tangentially related changes:
* IsServicePrincipal now uses the "users" API rather than the
"principals" API, since the latter is too slow for our purposes.
* mode: prod no longer requires the 'target.prod.git' setting. It's hard
to set that from a template. (Pieter is planning an overhaul of warnings
support; this would be one of the first warnings we show.)
The actual `default-python` template is maintained in a separate PR:
https://github.com/databricks/cli/pull/686
## Tests
Unit tests, manual testing
## Changes
Added run_as section for bundle configuration.
This section allows to define an user name or service principal which
will be applied as an execution identity for jobs and DLT pipelines. In
the case of DLT, identity defined in `run_as` will be assigned
`IS_OWNER` permission on this pipeline.
## Tests
Added unit tests for configuration.
Also ran deploy for the following bundle configuration
```
bundle:
name: "run_as"
run_as:
# service_principal_name: "f7263fcc-56d0-4981-8baf-c2a45296690b"
user_name: "lennart.kats@databricks.com"
resources:
pipelines:
andrew_pipeline:
name: "Andrew Nester pipeline"
libraries:
- notebook:
path: ./test.py
jobs:
job_one:
name: Job One
tasks:
- task_key: "task"
new_cluster:
num_workers: 1
spark_version: 13.2.x-snapshot-scala2.12
node_type_id: i3.xlarge
runtime_engine: PHOTON
notebook_task:
notebook_path: "./test.py"
```
## Changes
Renamed Environments to Targets in bundle.yml.
The change is backward-compatible and customers can continue to use
`environments` in the time being.
## Tests
Added tests which checks that both `environments` and `targets` sections
in bundle.yml works correctly
## Changes
This is not desirable and will be addressed by representing our
configuration in a different structure (e.g. with cty, or with
plain `any`), instead of Go structs.
## Tests
Pass.
## Changes
Prompt UI glitches often. We are switching to a custom implementation of
a simple prompter which is much more stable.
This also allows new lines in prompts which has been an ask by the
mlflow team.
## Tests
Tested manually
## Changes
Originally, these blocks were merged with overrides. This was
(inadvertently) disabled in #94. This change re-enables merging these
blocks with overrides, such that any field set in an environment
override always takes precedence over the field set in the base
definition.
## Tests
New unit test passes.
## Changes
While they are a slice, we can identify a job cluster by its job cluster
key. A job definition with multiple job clusters with the same key is
always invalid. We can therefore merge definitions with the same key
into one. This is compatible with how environment overrides are applied;
merging a slice means appending to it. The override will end up in the
job cluster slice of the original, which gives us a deterministic way to
merge them.
Since the alternative is an invalid configuration, this doesn't change
behavior.
## Tests
New test coverage.
## Changes
This PR:
1. Introduces the "internal" tag to bundle configs that should not be
visible to customers.
2. Annotates "metadata_service_url" as an internal field.
## Tests
Unit tests.
## Changes
This PR:
1. Fixes the computation logic for `ActualBranch`. An error in the
earlier logic caused the validation mutator to be a no-op.
2. Makes the `.git` string a global var. This is useful to configure in
tests.
3. Adds e2e test for the validation mutator.
## Tests
Unit test
## Changes
Some library paths such as for Spark jobs, can reference a lib on remote
path, for example DBFS.
This PR fixes how CLI handles such libraries and do not report them as
missing locally.
## Tests
Added unit tests + ran `databricks bundle deploy` manually
## Changes
This PR:
1. Regenerates the terraform provider structs based off the latest
terraform provider version: 1.22.0
2. Adds a debug launch configuration for regenerating the schema
## Tests
Existing unit tests
## Changes
* This PR adds `DATABRICKS_BUNDLE_INCLUDE_PATHS` environment variable,
so that we can specify including bundle config files, which we do not
want to commit. These could potentially be local dev overrides or
overrides by our tools - like the VS Code extension
* We always add these include paths to the "include" field.
## Tests
* [x] Unit tests
## Changes
This PR:
1. Adds code for reading template configs and validating them against a
JSON schema.
2. Moves the json schema struct in `bundle/schema` to a separate library
package. This struct is now reused for validating template configs.
## Tests
Unit tests
## Changes
This checks whether the Git settings are consistent with the actual Git
state of a source directory.
(This PR adds to https://github.com/databricks/cli/pull/577.)
Previously, we would silently let users configure their Git branch to
e.g. `main` and deploy with that metadata even if they were actually on
a different branch.
With these changes, the following config would result in an error when
deployed from any other branch than `main`:
```
bundle:
name: example
workspace:
git:
branch: main
environments:
...
```
> not on the right Git branch:
> expected according to configuration: main
> actual: my-feature-branch
It's not very useful to set the same branch for all environments,
though. For development, it's better to just let the CLI auto-detect the
right branch. Therefore, it's now possible to set the branch just for a
single environment:
```
bundle:
name: example 2
environments:
development:
default: true
production:
# production can only be deployed from the 'main' branch
git:
branch: main
```
Adding to that, the `mode: production` option actually checks that users
explicitly set the Git branch as seen above. Setting that branch helps
avoid mistakes, where someone accidentally deploys to production from
the wrong branch. (I could see us offering an escape hatch for that in
the future.)
# Testing
Manual testing to validate the experience and error messages. Automated
unit tests.
---------
Co-authored-by: Fabian Jakobs <fabian.jakobs@databricks.com>
## Changes
This adds `mode: production` option. This mode doesn't do any
transformations but verifies that an environment is configured correctly
for production:
```
environments:
prod:
mode: production
# paths should not be scoped to a user (unless a service principal is used)
root_path: /Shared/non_user_path/...
# run_as and permissions should be set at the resource level (or at the top level when that is implemented)
run_as:
user_name: Alice
permissions:
- level: CAN_MANAGE
user_name: Alice
```
Additionally, this extends the existing `mode: development` option,
* now prefixing deployed assets with `[dev your.user]` instead of just
`[dev`]
* validating that development deployments _are_ scoped to a user
## Related
https://github.com/databricks/cli/pull/578/files (in draft)
## Tests
Manual testing to validate the experience, error messages, and
functionality with all resource types. Automated unit tests.
---------
Co-authored-by: Fabian Jakobs <fabian.jakobs@databricks.com>
## Changes
Added support for artifacts building for bundles.
Now it allows to specify `artifacts` block in bundle.yml and define a
resource (at the moment Python wheel) to be build and uploaded during
`bundle deploy`
Built artifact will be automatically attached to corresponding job task
or pipeline where it's used as a library
Follow-ups:
1. If artifact is used in job or pipeline, but not found in the config,
try to infer and build it anyway
2. If build command is not provided for Python wheel artifact, infer it
## Changes
Before this PR we would load all yaml files matching * and \*/\*.yml
files as bundle configurations. This was problematic since this would
also load yaml files that were not meant to be a part of the bundle
## Tests
Manually, now files are no longer included unless manually specified
## Changes
* Add support for using `databricks.yml` as config file. If
`databricks.yml` is not found then falling back to `bundle.yml` for
backwards compatibility.
* Add support for `.yaml` extension.
* Give an error when more than one config file is found
## Tests
* added unit test
* manual testing the different cases
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Uploading a notebook strips it's file extension. This PR returns an
error if a notebook is specified where a file is expected. For example:
A spark python task in a job or `libraries.file.path` DLT library (where
instead `libraries.notebook.path` should be used
This PR also adds test coverage for the opposite case, when files are
not notebooks where notebooks are expected.
## Tests
Integration tests and manually
## Changes
Correctly use --profile flag passed for all bundle commands.
Also adds a validation that if bundle configured host mismatches
provided profile, it throws an error.
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
This implements the "development run" functionality that we desire for DABs in the workspace / IDE.
## bundle.yml changes
In bundle.yml, there should be a "dev" environment that is marked as
`mode: debug`:
```
environments:
dev:
default: true
mode: development # future accepted values might include pull_request, production
```
Setting `mode` to `development` indicates that this environment is used
just for running things for development. This results in several changes
to deployed assets:
* All assets will get '[dev]' in their name and will get a 'dev' tag
* All assets will be hidden from the list of assets (future work; e.g.
for jobs we would have a special job_type that hides it from the list)
* All deployed assets will be ephemeral (future work, we need some form
of garbage collection)
* Pipelines will be marked as 'development: true'
* Jobs can run on development compute through the `--compute` parameter
in the CLI
* Jobs get their schedule / triggers paused
* Jobs get concurrent runs (it's really annoying if your runs get
skipped because the last run was still in progress)
Other accepted values for `mode` are `default` (which does nothing) and
`pull-request` (which is reserved for future use).
## CLI changes
To run a single job called "shark_sighting" on existing compute, use the
following commands:
```
$ databricks bundle deploy --compute 0617-201942-9yd9g8ix
$ databricks bundle run shark_sighting
```
which would deploy and run a job called "[dev] shark_sightings" on the
compute provided. Note that `--compute` is not accepted in production
environments, so we show an error if `mode: development` is not used.
The `run --deploy` command offers a convenient shorthand for the common
combination of deploying & running:
```
$ export DATABRICKS_COMPUTE=0617-201942-9yd9g8ix
$ bundle run --deploy shark_sightings
```
The `--deploy` addition isn't really essential and I welcome feedback 🤔
I played with the idea of a "debug" or "dev" command but that seemed to
only make the option space even broader for users. The above could work
well with an IDE or workspace that automatically sets the target
compute.
One more thing I added is`run --no-wait` can now be used to run
something without waiting for it to be completed (useful for IDE-like
environments that can display progress themselves).
```
$ bundle run --deploy shark_sightings --no-wait
```
## Tests
Tested manually. `"workspace"` is no longer a required field in the
generated JSON schema
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Propagate `TF_CLI_CONFIG_FILE` env variable.
From Terraform documentation:
> The location of the Terraform CLI configuration file can also be
specified using the TF_CLI_CONFIG_FILE [environment
variable](https://developer.hashicorp.com/terraform/cli/config/environment-variables)
It allows using custom builds of terraform-provider-databricks, using
config files like:
```tf
provider_installation {
dev_overrides {
"databricks/databricks" = "/Users/gleb.kanterov/terraform-provider-databricks"
}
direct {}
}
```
## Tests
I added unit tests.
## Changes
Fixed error reporting when included invalid files in include section
Case 1. When the file to include is invalid, throw an error
Case 2. When the file is loaded but the schema is wrong, indicate which
file is failed to load
## Tests
With non-existent notexists.yml
```
databricks bundle deploy
Error: notexists.yml defined in 'include' section does not match any files
```
With malformed notexists.yml
```
databricks bundle deploy
Error: failed to load /Users/andrew.nester/dabs/wheel/notexists.yml: error unmarshaling JSON: json: cannot unmarshal string into Go value of type config.Root
```
## Changes
Adds the following steps to the destroy phase:
1. interpolate
2. write
Resolves#518
## Tests
Tested manually due there not being an examples for tests to use.
## Changes
Modified interpolation logic to use:
`\$\{([a-zA-Z]+([-_]*[a-zA-Z0-9]+)*(\.[a-zA-Z]+([-_]*[a-zA-Z0-9]+)*)*)\}`
**Edit**: Suggested by @pietern
`\$\{([a-zA-Z]+([-_]?[a-zA-Z0-9]+)*(\.[a-zA-Z]+([-_]?[a-zA-Z0-9]+)*)*)\}`
to be more selective and not allow consequent hyphens or underscores to
make the keys more readable.
Explanation:
1. All interpolation starts with `${` and ends with `}`
2. All interpolated locations are split by by `.`
3. All sections are expected to start with a alphabet `[a-zA-Z]`; no
numbers, hyphens or underscores.
4. All sections are expected to end with an alphanumeric `[a-zA-Z0-9]`
no hyphens or underscores
This change allows the current interpolation to be more permissive.
**Note** it does break backwards compatibility because `[a-zA-Z] !=
[\w]`. `\w` includes alphanumeric and underscores. `\w = [a-zA-Z0-9_]`
## Tests
There are two tests with examples of valid and invalid interpolation and
a test to validate expansion.
## Changes
Add DATABRICKS_BUNDLE_TMP env variable. It allows using a temporary
directory instead of writing to `$CWD/.databricks/bundle`
## Tests
I added unit tests
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
Lennart Kats (databricks)
Andrew Nester
Pieter Noordhuis
shreyas-goenka
Kartik Gupta
Fabian Jakobs
dependabot[bot]
Gleb Kanterov
stikkireddy
Serge Smertin