## Changes
This adds diagnostics for collaborative (production) deployment
scenarios, including:
- Bob deploys a bundle that is normally deployed by Alice, but this
fails because Bob can't write to `/Users/Alice/.bundle`.
- Charlie deploys a bundle that is normally deployed by Alice, but this
fails because he can't create a new pipeline where Alice would be the
owner.
- Alice deploys a bundle where she didn't list herself as one of the
CAN_MANAGE users in permissions. That can work, but is probably a
mistake.
## Tests
Unit tests, manual testing.
## Changes
We do not need the user to specify these fields in their bundle
configuration, so we remove them from the JSON schema.
## Tests
Manually and end to end tests. The JSON schema has also been regenerated
after these changes.
## Changes
We want to encourage a pattern of specifying only a single resource in a
YAML file when the `.(resource-type).yml` extension is used (for
example, `.job.yml`). This convention could allow us to bijectively map
a resource YAML file to its corresponding resource in the Databricks
workspace.
This PR:
1. Emits a recommendation diagnostic when we detect this convention is
being violated. We can promote this to a warning when we want to
encourage this pattern more strongly.
2. Visualises the recommendation diagnostics in the `bundle validate`
command.
**NOTE:** While this PR also shows the recommendation for `.yaml` files,
we do not encourage users to use this extension. We only support it here
since it's part of the YAML standard and some existing users might
already be using `.yaml`.
## Tests
Unit tests and manually. Here's what an example output looks like:
```
Recommendation: define a single job in a file with the .job.yml extension.
at resources.jobs.bar
resources.jobs.foo
in foo.job.yml:13:7
foo.job.yml:5:7
The following resources are defined or configured in this file:
- bar (job)
- foo (job)
```
---------
Co-authored-by: Lennart Kats (databricks) <lennart.kats@databricks.com>
## Changes
Due to platform changes, all libraries, notebooks and etc. paths used in
Databricks must be started with either /Workspace or /Volumes prefix.
This PR makes sure that all bundle paths are correctly prefixed.
Note: this change is a breaking change if user previously configured and
used `/Workspace/Workspace` folder in their workspace file system or
having `/Workspace/${workspace.root_path}...` pattern configured
anywhere in their bundle config
Fixes: #1751
AI:
- [x] Scan DABs config and error out on
`/Workspace/${workspace.root_path}...` pattern usage
## Tests
Added unit tests
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Default workspace path for resources with a presence in the workspace
tree.
Note: this path is **not** created automatically (yet). We need this
only for dashboards (so far), so can take care of creation if one or
more dashboards are part of a deployment. This saves an API call for
deployments where this is not necessary.
## Tests
Expanded existing tests.
## Changes
Currently API limits on exporting files from workspaces are set at 10
MBs while uploading to is 500 MBs. We want to prevent users running into
deadlock when they won't be able to pull state file anymore so we
prevent from uploading large state files (over 10 MBs) to Databricks
workspace.
## Changes
This fixes the user-reported panic in `apply_presets.go`. I'm still
unsure how to reproduce this, since the CLI just reports `ob broken_job
is not defined` when I try to use `bundle deploy` with an empty job.
That said — we may as well be defensive here and I see we have lots of
checks for empty job/cluster/etc. settings scattered throughout our code
base so at least we're somewhat consistent.
## Changes
After introducing the `SyncRootPath` field on the bundle (#1694), the
previous `RootPath` became ambiguous. Does it mean the bundle root path
or the sync root path? This PR renames to field to `BundleRootPath` to
remove the ambiguity.
## Tests
n/a
---------
Co-authored-by: shreyas-goenka <88374338+shreyas-goenka@users.noreply.github.com>
## Changes
Sort the tasks in the resultant `bundle.tf.json`. This is important
because configuration from one task can leak into another if the tasks
are not sorted.
For more details see:
1.
https://github.com/databricks/terraform-provider-databricks/issues/3951
2.
https://github.com/databricks/terraform-provider-databricks/issues/4011
## Tests
Unit test and manually.
For manual testing I used the following configuration:
```
resources:
jobs:
foo:
tasks:
- task_key: task-Z
notebook_task:
notebook_path: nb.py
source: GIT
existing_cluster_id: 0715-133738-ju0ma84z
- task_key: task-1
notebook_task:
notebook_path: ${workspace.file_path}/local.py
source: WORKSPACE
existing_cluster_id: 0715-133738-ju0ma84z
depends_on:
- task_key: task-Z
git_source:
git_provider: gitHub
git_url: https://github.com/shreyas-goenka/job-source-tmp.git
git_branch: main
```
Steps (1):
1. Deploy this bundle.
2. Comment out "source: GIT"
3. Deploy again
Before:
Deploying this bundle twice would fail. This is because the "source:
GIT" would carry over to the next deployment.
After:
There was no error on the subsequent deployment.
Steps (2):
1. Deploy once
2. Deploy again
Before:
Works correctly but leads to a update API call every time.
After:
No diff is detected by terraform.
I plan to use this in https://github.com/databricks/cli/pull/1780, to
set the line and column numbers as well for the locations.
gopatch file used:
```
@@
var x expression
var y expression
var z expression
@@
-bundletest.SetLocation(x, y, z)
+bundletest.SetLocation(x, y, []dyn.Location{{File: z}})
```
## Changes
Add JobTaskClusterSpec validate mutator. It catches the case when tasks
don't which cluster to use.
For example, we can get this error with minor modifications to
`default-python` template:
```yaml
tasks:
- task_key: python_file_task
spark_python_task:
python_file: ../src/my_project_10/main.py
```
```
% databricks bundle validate
Error: Missing required cluster or environment settings
at resources.jobs.my_project_10_job.tasks[0]
in resources/my_project_10_job.yml:17:11
Task "print_github_stars" requires a cluster or an environment to run.
Specify one of the following fields: job_cluster_key, environment_key, existing_cluster_id, new_cluster.
```
We implicitly rely on "one of" validation, which does not exist. Many
bundle fields can't co-exist, for instance, specifying:
`JobTask.{existing_cluster_id,job_cluster_key}`, `Library.{whl,pypi}`,
`JobTask.{notebook_task,python_wheel_task}`, etc.
## Tests
Unit tests
---------
Co-authored-by: Pieter Noordhuis <pcnoordhuis@gmail.com>
## Changes
- Extract sync output logic from `cmd/sync` into `lib/sync`
- Add hidden `verbose` flag to the `bundle deploy` command, it's false
by default and hidden from the `--help` output
- Pass output handler to the `deploy/files/upload` mutator if the
verbose option is true
The was an idea to use in-place output overriding each past file sync
event in the output, bit that wont work for the extension, since it
doesn't display deploy logs in the terminal.
Example output:
```
~/tmp/defpy: ~/cli/cli bundle deploy --sync-progress
Building defpy...
Uploading defpy-0.0.1+20240917.112755-py3-none-any.whl...
Uploading bundle files to /Users/ilia.babanov@databricks.com/.bundle/defpy/dev/files...
Action: PUT: requirements-dev.txt, resources/defpy_pipeline.yml, pytest.ini, src/defpy/main.py, src/defpy/__init__.py, src/dlt_pipeline.ipynb, tests/main_test.py, src/notebook.ipynb, setup.py, resources/defpy_job.yml, .vscode/extensions.json, .vscode/settings.json, fixtures/.gitkeep, .vscode/__builtins__.pyi, README.md, .gitignore, databricks.yml
Uploaded tests
Uploaded resources
Uploaded fixtures
Uploaded .vscode
Uploaded src/defpy
Uploaded requirements-dev.txt
Uploaded .gitignore
Uploaded fixtures/.gitkeep
Uploaded src/defpy/__init__.py
Uploaded databricks.yml
Uploaded README.md
Uploaded setup.py
Uploaded .vscode/__builtins__.pyi
Uploaded .vscode/extensions.json
Uploaded src/dlt_pipeline.ipynb
Uploaded .vscode/settings.json
Uploaded resources/defpy_job.yml
Uploaded pytest.ini
Uploaded src/defpy/main.py
Uploaded tests/main_test.py
Uploaded resources/defpy_pipeline.yml
Uploaded src/notebook.ipynb
Initial Sync Complete
Deploying resources...
Updating deployment state...
Deployment complete!
```
Output example in the extension:
<img width="1843" alt="Screenshot 2024-09-19 at 11 07 48"
src="https://github.com/user-attachments/assets/0fafd095-cdc6-44b8-b482-27a38ada0330">
## Tests
Manually for the `sync` and `bundle deploy` commands + vscode extension
sync and deploy flows
## Changes
Upgrade to TF provider 1.52
We also temporarily skip generating plugin framework structs to unblock
upgrade as generation does not work yet and need to be fixed separately
## Summary
Use the friendly name of service principals when shortening their name.
This change is helpful for the prefix in development mode. Instead of
adding a prefix like `[dev 1706906c-c0a2-4c25-9f57-3a7aa3cb8123]`, we'll
prefix like `[dev my_principal]`.
## Changes
This PR aliases and overrides the schema associated with the variables
block in `target` to allow for directly specifying a variable value in
the JSON schema (without an levels of nesting). This is needed because
this direct value is resolved by dynamically parsing the configuration
tree.
ca6332a5a4/bundle/config/root.go (L424)
## Tests
Existing unit tests.
## Changes
This PR makes sweeping changes to the way we generate and test the
bundle JSON schema. The main benefits are:
1. More modular JSON schema. Every definition in the schema now is one
level deep and points to references instead of inlining the entire
schema for a field. This unblocks PyDABs from taking a dependency on the
JSON schema.
2. Generate the JSON schema during CLI code generation. Directly stream
it instead of computing it at runtime whenever a user calls `databricks
bundle schema`. This is nice because we no longer need to embed a
partial OpenAPI spec in the CLI. Down the line, we can add a `Schema()`
method to every struct in the Databricks Go SDK and remove the
dependency on the OpenAPI spec altogether. It'll become more important
once we decouple Go SDK structs and methods from the underlying APIs.
3. Add enum values for Go SDK fields in the JSON schema. Better
autocompletion and validation for these fields. As a follow-up, we can
add enum values for non-Go SDK enums as well (created internal ticket to
track).
4. Use "packageName.structName" as a key to read JSON schemas from the
OpenAPI spec for Go SDK structs. Before, we would use an unrolled
presentation of the JSON schema (stored in `bundle_descriptions.json`),
which was complex to parse and include in the final JSON schema output.
This also means loading values from the OpenAPI spec for `target` schema
works automatically and no longer needs custom code.
5. Support recursive types (eg: `for_each_task`). With us now using
$refs everywhere it's trivial to support.
6. Using complex variables would be invalid according to the schema
generated before this PR. Now that bug is fixed. In the future adding
more custom rules will be easier as well due to the single level nature
of the JSON schema.
Since this is a complete change of approach in how we generate the JSON
schema, there are a few (very minor) regressions worth calling out.
1. We'll lose a few custom descriptions for non Go SDK structs that were
a part of `bundle_descriptions.json`. Support for those can be added in
the future as a followup.
2. Since now the final JSON schema is a static artefact, we lose some
lead time for the signal that JSON schema integration tests are failing.
It's okay though since we have a lot of coverage via the existing unit
tests.
## Tests
Unit tests. End to end tests are being added in this PR:
https://github.com/databricks/cli/pull/1726
Previous unit tests were all deleted because they were bloated. Effort
was made to make the new unit tests provide (almost) equivalent
coverage.
## Changes
Library glob expansion happens during deployment. Before that, all
entries that refer to local paths in resource definitions are made
relative to the _sync root_. Before #1694, they were made relative to
the _bundle root_. This PR didn't update the library glob expansion code
to use the sync root path.
If you were using the sync paths setting with library globs, the CLI
would fail to expand the globs because the code was using the wrong path
to anchor those globs.
This change fixes the issue.
## Tests
Manually confirmed that this fixes the issue reported in #1755.
## Changes
We added a custom resolver for the cluster to add filtering for the
cluster source when we list all clusters.
Without the filtering listing could take a very long time (5-10 mins)
which leads to lookup timeouts.
## Tests
Existing unit tests passing
## Changes
Some call sites hold on to the `dyn.Path` provided to them by the
callback. It must therefore never be mutated after the callback returns,
or these mutations leak out into unknown scope.
This change means it is no longer possible for this failure mode to
happen.
## Tests
Unit test.
## Changes
Fixes an `Error: no value assigned to required variable <variable>.`
when the main complex variable definition is defined in one file but
target override is defined in separate file which is included in the
main one.
## Tests
Added regression test
## Changes
DLT pipeline recreations are destructive. They can lead to lost history
of previous updates, outage of the tables temporarily and are
potentially computationally expensive. Thus we make a breaking change
where a prompt is shown to the user if there configuration changes will
lead to a DLT recreation.
Users can skip the prompt by specifying the `--auto-approve` flag.
This PR also fixes an issue with our test runner where logs from the
cmdio.Logger would not get propagated to the reader returned by our
cobra test runner.
## Tests
Manually, and new unit and integration tests.
```
➜ bundle-playground-3 cli bundle deploy
Uploading bundle files to /Users/63ec021d-b0c6-49c0-93a0-5123953a1cb2/.bundle/test/development/files...
The following DLT pipelines will be recreated. Underlying tables will be unavailable for a transient period until the newly recreated pipelines are run once successfully. History of previous pipeline update runs will be lost because of recreation:
recreate pipeline foo
Would you like to proceed? [y/n]: n
Deployment cancelled!
```
## Changes
We were not using the readers and writers set in the test fixtures in
the progress logger. This PR fixes that. It also modifies
`TestAccAbortBind`, which was implicitly relying on the bug.
I encountered this bug while working on
https://github.com/databricks/cli/pull/1672.
## Tests
Manually.
From non-tty:
```
Error: failed to bind the resource, err: This bind operation requires user confirmation, but the current console does not support prompting. Please specify --auto-approve if you would like to skip prompts and proceed.
```
From tty, bind works as expected.
```
Confirm import changes? Changes will be remotely applied only after running 'bundle deploy'. [y/n]: y
Updating deployment state...
Successfully bound databricks_pipeline with an id '9d2dedbb-f522-4503-96ba-4bc4d5bfa77d'. Run 'bundle deploy' to deploy changes to your workspace
```
## Changes
Explain the error when the `databricks-pydabs` package is not installed
or the Python environment isn't correctly activated.
Example output:
```
Error: python mutator process failed: ".venv/bin/python3 -m databricks.bundles.build --phase load --input .../input.json --output .../output.json --diagnostics .../diagnostics.json: exit status 1", use --debug to enable logging
.../.venv/bin/python3: Error while finding module specification for 'databricks.bundles.build' (ModuleNotFoundError: No module named 'databricks')
Explanation: 'databricks-pydabs' library is not installed in the Python environment.
If using Python wheels, ensure that 'databricks-pydabs' is included in the dependencies,
and that the wheel is installed in the Python environment:
$ .venv/bin/pip install -e .
If using a virtual environment, ensure it is specified as the venv_path property in databricks.yml,
or activate the environment before running CLI commands:
experimental:
pydabs:
venv_path: .venv
```
## Tests
Unit tests
## Changes
Preserve diagnostics if there are any errors or warnings when
PythonMutator normalizes output. If anything goes wrong during
conversion, diagnostics contain the relevant location and path.
## Tests
Unit tests
## Changes
This ensures that the CLI and Terraform can both use an Azure CLI
session configured under a non-standard path. This is the default
behavior on Azure DevOps when using the AzureCLI@2 task.
Fixes#1722.
## Tests
Unit test.
## Changes
Consider serverless clusters as compatible for Python wheel tasks.
Fixes a `Python wheel tasks require compute with DBR 13.3+ to include
local libraries` warning shown for serverless clusters
## Changes
* Provide a more helpful error when using an artifact_path based on
/Volumes
* Allow the use of short_names in /Volumes paths
## Example cases
Example of a valid /Volumes artifact_path:
* `artifact_path:
/Volumes/catalog/schema/${workspace.current_user.short_name}/libs`
Example of an invalid /Volumes path (when using `mode: development`):
* `artifact_path: /Volumes/catalog/schema/libs`
* Resulting error: `artifact_path should contain the current username or
${workspace.current_user.short_name} to ensure uniqueness when using
'mode: development'`
## Changes
Fixes issue introduced here https://github.com/databricks/cli/pull/1699
where PyPi packages were treated as local library.
The reason is that `libraryPath` returns an empty string as a path for
PyPi packages and then `IsLibraryLocal` treated empty string as local
path.
Both of these functions are fixed in this PR.
## Tests
Added regression test
## Changes
This changes makes sure we ignore CLI version check on development
builds of the CLI.
Before:
```
$ cat databricks.yml | grep cli_version
databricks_cli_version: ">= 0.223.1"
$ cli bundle deploy
Error: Databricks CLI version constraint not satisfied. Required: >= 0.223.1, current: 0.0.0-dev+06b169284737
```
after
```
...
$ cli bundle deploy
...
Warning: Ignoring Databricks CLI version constraint for development build. Required: >= 0.223.1, current: 0.0.0-dev+d52d6f08fcd5
```
## Tests
<!-- How is this tested? -->
## Changes
This field allows a user to configure paths to synchronize to the
workspace.
Allowed values are relative paths to files and directories anchored at
the directory where the field is set. If one or more values traverse up
the directory tree (to an ancestor of the bundle root directory), the
CLI will dynamically determine the root path to use to ensure that the
file tree structure remains intact.
For example, given a `databricks.yml` in `my_bundle` that includes:
```yaml
sync:
paths:
- ../common
- .
```
Then upon synchronization, the workspace will look like:
```
.
├── common
│ └── lib.py
└── my_bundle
├── databricks.yml
└── notebook.py
```
If not set behavior remains identical.
## Tests
* Newly added unit tests for the mutators and under `bundle/tests`.
* Manually confirmed a bundle without this configuration works the same.
* Manually confirmed a bundle with this configuration works.
## Changes
In https://github.com/databricks/cli/pull/1490 we regressed and started
using the development mode prefix for UC schemas regardless of the mode
of the bundle target.
This PR fixes the regression and adds a regression test
## Tests
Failing integration tests pass now.
## Changes
While experimenting with DAB I discovered that requirements libraries
are being ignored.
One thing worth mentioning is that `bundle validate` runs successfully,
but `bundle deploy` fails. This PR only covers the second part.
## Tests
<!-- How is this tested? -->
Added a unit test
## Changes
Make `pydabs/venv_path` optional. When not specified, CLI detects the
Python interpreter using `python.DetectExecutable`, the same way as for
`artifacts`. `python.DetectExecutable` works correctly if a virtual
environment is activated or `python3` is available on PATH through other
means.
Extract the venv detection code from PyDABs into `libs/python/detect`.
This code will be used when we implement the `python/venv_path` section
in `databricks.yml`.
## Tests
Unit tests and manually
---------
Co-authored-by: Pieter Noordhuis <pcnoordhuis@gmail.com>
## Changes
These tests inadvertently re-ran mutators, the first time through
`loadTarget` and the second time by running `phases.Initialize()`
themselves. Some of the mutators that are executed in
`phases.Initialize()` are also run as part of `loadTarget`. This is
overdue a refactor to make it unambiguous what runs when. Until then,
this removes the duplicated execution.
## Tests
Unit tests pass.
## Changes
This PR addressed post-merge feedback from
https://github.com/databricks/cli/pull/1673.
## Tests
Unit tests, and manually.
```
Error: experiment undefined-experiment is not defined
at resources.experiments.undefined-experiment
in databricks.yml:11:26
Error: job undefined-job is not defined
at resources.jobs.undefined-job
in databricks.yml:6:19
Error: pipeline undefined-pipeline is not defined
at resources.pipelines.undefined-pipeline
in databricks.yml:14:24
Name: undefined-job
Target: default
Found 3 errors
```
## Changes
This adds configurable transformations based on the transformations
currently seen in `mode: development`.
Example databricks.yml showcasing how some transformations:
```
bundle:
name: my_bundle
targets:
dev:
presets:
prefix: "myprefix_" # prefix all resource names with myprefix_
pipelines_development: true # set development to true by default for pipelines
trigger_pause_status: PAUSED # set pause_status to PAUSED by default for all triggers and schedules
jobs_max_concurrent_runs: 10 # set max_concurrent runs to 10 by default for all jobs
tags:
dev: true
```
## Tests
* Existing process_target_mode tests that were adapted to use this new
code
* Unit tests specific for the new mutator
* Unit tests for config loading and merging
* Manual e2e testing
## Changes
Before this change, the fileset library would take a single root path
and list all files in it. To support an allowlist of paths to list (much
like a Git `pathspec` without patterns; see [pathspec](pathspec)), this
change introduces an optional argument to `fileset.New` where the caller
can specify paths to list. If not specified, this argument defaults to
list `.` (i.e. list all files in the root).
The motivation for this change is that we wish to expose this pattern in
bundles. Users should be able to specify which paths to synchronize
instead of always only synchronizing the bundle root directory.
[pathspec]:
https://git-scm.com/docs/gitglossary#Documentation/gitglossary.txt-aiddefpathspecapathspec
## Tests
New and existing unit tests.
## Changes
This PR removes the dependency to the `databricks-sdk-go/openapi`
package by copying the struct and functions that are needed in a new
`schema/spec.go` file.
The reason to remove this dependency is that it is being deprecated.
Copying the code in the `cli` repo seems reasonable given that it only
uses a couple of very small structs.
## Tests
Verified that CLI code can be properly generated after this change.
## Changes
Previously for all the libraries referenced in configuration DABs made
sure that there is corresponding artifact section.
But this is not really necessary and flexible, because local libraries
might be built outside of dabs context.
It also created difficult to follow logic in code where we back
referenced libraries to artifacts which was difficult to fllow
This PR does 3 things:
1. Allows all local libraries referenced in DABs config to be uploaded
to remote
2. Simplifies upload and glob references expand logic by doing this in
single place
3. Speed things up by uploading library only once and doing this in
parallel
## Tests
Added unit + integration tests + made sure that change is backward
compatible (no changes in existing tests)
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Since locations are already tracked in the dynamic value tree, we no
longer need to track it at the resource/artifact level. This PR:
1. Removes use of `paths.Paths`. Uses dyn.Location instead.
2. Refactors the validation of resources not being empty valued to be
generic across all resource types.
## Tests
Existing unit tests.
## Changes
This didn't work as expected because the generic build mutator called
into the type-specific build mutator in the middle of the function. This
invalidated the `config.Artifact` pointer that was being mutated later
on, effectively hiding these mutations from its caller.
To fix this, I turned glob expansion into its own mutator. It now works
as expected, _and_ produces better errors if the glob patterns are
invalid or do not match files.
## Tests
Unit tests.
Manual verification:
```
% databricks bundle deploy
Building sbt_example...
Error: target/scala-2.12/sbt-e[xam22ple*.jar: syntax error in pattern
at artifacts.sbt_example.files[1].source
in databricks.yml:15:17
```
## Changes
This change enables overriding the default value of job parameters in
target overrides.
This is the same approach we already take for job clusters and job
tasks.
Closes#1620.
## Tests
Mutator unit tests and lightweight end-to-end tests.
## Changes
In https://github.com/databricks/cli/pull/1618 we introduced prepare
step in which Python wheel folder was cleaned. Now it was cleaned
everytime instead of only when there is a build command how it is used
to work.
This PR fixes it by only cleaning up dist folder when there is a build
command for wheels.
Fixes#1638
## Tests
Added regression test
# Changes
With https://github.com/databricks/cli/pull/1413 we started to compute
and partially print the plan if it contained deletion of UC schemas.
This PR uses the precomputed plan to avoid double planning when actually
doing the terraform plan.
This fixes a performance regression introduced in
https://github.com/databricks/cli/pull/1413.
# Tests
Tested manually.
1. Verified bundle deployment still works and deploys resources.
2. Verified that the precomputed plan is indeed being used by attaching
a debugger and removing the plan file right before the terraform apply
process is spawned and asserting that terraform apply fails because the
plan is not found.
## Changes
This PR adds support for UC Schemas to DABs. This allows users to define
schemas for tables and other assets their pipelines/workflows create as
part of the DAB, thus managing the life-cycle in the DAB.
The first version has a couple of intentional limitations:
1. The owner of the schema will be the deployment user. Changing the
owner of the schema is not allowed (yet). `run_as` will not be
restricted for DABs containing UC schemas. Let's limit the scope of
run_as to the compute identity used instead of ownership of data assets
like UC schemas.
2. API fields that are present in the update API but not the create API.
For example: enabling predictive optimization is not supported in the
create schema API and thus is not available in DABs at the moment.
## Tests
Manually and integration test. Manually verified the following work:
1. Development mode adds a "dev_" prefix.
2. Modified status is correctly computed in the `bundle summary`
command.
3. Grants work as expected, for assigning privileges.
4. Variable interpolation works for the schema ID.
## Changes
This PR:
1. Uses dynamic walking (via the `dyn.MapByPattern` func) to validate no
two resources have the same resource key. The allows us to remove this
validation at merge time.
2. Modifies `dyn.Mapping` to always return a sorted slice of pairs. This
makes traversal functions like `dyn.Walk` or `dyn.MapByPattern`
deterministic.
## Tests
Unit tests. Also manually.
## Changes
Some diagnostics can have multiple paths associated with them. For
instance, ensuring that unique resource keys are used across all
resources. This PR extends `diag.Diagnostic` to accept multiple paths.
This PR is symmetrical to
https://github.com/databricks/cli/pull/1610/files
## Tests
Unit tests
## Changes
Right now we ask users for two confirmations when destroying a bundle.
One to destroy the resources and one to delete the files. This PR
consolidates the two prompts into one.
## Tests
Manually
Destroying a bundle with no resources:
```
➜ bundle-playground git:(master) ✗ cli bundle destroy
All files and directories at the following location will be deleted: /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default
Would you like to proceed? [y/n]: y
No resources to destroy
Updating deployment state...
Deleting files...
Destroy complete!
```
Destroying a bundle with no remote state:
```
➜ bundle-playground git:(master) ✗ cli bundle destroy
No active deployment found to destroy!
```
When a user cancells a deployment:
```
➜ bundle-playground git:(master) ✗ cli bundle destroy
The following resources will be deleted:
delete job job_1
delete job job_2
delete pipeline foo
All files and directories at the following location will be deleted: /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default
Would you like to proceed? [y/n]: n
Destroy cancelled!
```
When a user destroys resources:
```
➜ bundle-playground git:(master) ✗ cli bundle destroy
The following resources will be deleted:
delete job job_1
delete job job_2
delete pipeline foo
All files and directories at the following location will be deleted: /Users/shreyas.goenka@databricks.com/.bundle/bundle-playground/default
Would you like to proceed? [y/n]: y
Updating deployment state...
Deleting files...
Destroy complete!
```
## Changes
Now prepare stage which does cleanup is execute once before every build,
so artifacts built into the same folder are correctly kept
Fixes workaround 2 from this issue #1602
## Tests
Added unit test
## Changes
This PR changes `diag.Diagnostics` to allow including multiple locations
associated with the diagnostic message. The diagnostics that now return
multiple locations with this PR are:
1. Warning for unknown keys in config.
2. Use of experimental.run_as
3. Accidental sync.exludes that exclude all files.
## Tests
Existing unit tests pass. New unit test case to assert on error message
when multiple locations are included.
Example output:
```
➜ bundle-playground-2 ~/cli2/cli/cli bundle validate
Warning: You are using the legacy mode of run_as. The support for this mode is experimental and might be removed in a future release of the CLI. In order to run the DLT pipelines in your DAB as the run_as user this mode changes the owners of the pipelines to the run_as identity, which requires the user deploying the bundle to be a workspace admin, and also a Metastore admin if the pipeline target is in UC.
at experimental.use_legacy_run_as
in resources.yml:10:22
databricks.yml:13:22
Name: fix run_if
Target: default
Workspace:
User: shreyas.goenka@databricks.com
Path: /Users/shreyas.goenka@databricks.com/.bundle/fix run_if/default
Found 1 warning
```
## Changes
By default, construct a read/write instance. If constructed in read-only
mode, the underlying filer is wrapped in a readahead cache.
## Tests
* Filer integration tests pass.
* Manual test that caching is enabled when running on WSFS.
## Changes
DABs deployments should be isolated if `root_path` and workspace host
are different. This PR fixes a bug where local terraform state gets
piggybacked if the same cwd is used to deploy two isolated deployments
for the same bundle target. This can happen if:
1. A user switches to a different identity on the same machine.
2. The workspace host URL the bundle/target points to is changed.
3. A user changes the `root_path` while doing bundle development.
To solve this problem we rely on the lineage field available in the
terraform state, which is a uuid identifying unique terraform
deployments. There's a 1:1 mapping between a terraform deployment and a
bundle deployment.
For more details on how lineage works in terraform, see:
https://developer.hashicorp.com/terraform/language/state/backends#manual-state-pull-push
## Tests
Manually verified that changing the identity no longer results in the
incorrect terraform state being used. Also, new unit tests are added.
## Changes
This PR adds cli to the user agent sent downstream to the databricks
terraform provider when invoked via DABs.
## Tests
Unit tests. Based on the comment here
(10fe02075f/bundle/config/mutator/verify_cli_version_test.go (L113))
we don't need to set the version to make the test assertion work
correctly. This is likely because we use `go test` to run the tests
while the CLI is compiled and the version is set via `goreleaser`.
## Changes
This PR changes the location metadata associated with a `dyn.Value` to a
slice of locations. This will allow us to keep track of location
metadata across merges and overrides.
The convention is to treat the first location in the slice as the
primary location. Also, the semantics are the same as before if there's
only one location associated with a value, that is:
1. For complex values (maps, sequences) the location of the v1 is
primary in Merge(v1, v2)
2. For primitive values the location of v2 is primary in Merge(v1, v2)
## Tests
Modifying existing merge unit tests. Other existing unit tests and
integration tests pass.
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
We need a mechanism to invalidate the locally cached deployment state if
a user uses the same working directory to deploy to multiple distinct
deployments (separate targets, root_paths or even hosts).
This PR just adds the UUID to the deployment state in preparation for
invalidating this cache. The actual invalidation will follow up at a
later date (tracked in internal backlog).
## Tests
Unit test. Manually checked the deployment state is actually being
written.
## Changes
This change allows to specify UC volumes path as an artifact paths so
all artifacts (JARs, wheels) are uploaded to UC Volumes.
Example configuration is here:
```
bundle:
name: jar-bundle
workspace:
host: https://foo.com
artifact_path: /Volumes/main/default/foobar
artifacts:
my_java_code:
path: ./sample-java
build: "javac PrintArgs.java && jar cvfm PrintArgs.jar META-INF/MANIFEST.MF PrintArgs.class"
files:
- source: ./sample-java/PrintArgs.jar
resources:
jobs:
jar_job:
name: "Test Spark Jar Job"
tasks:
- task_key: TestSparkJarTask
new_cluster:
num_workers: 1
spark_version: "14.3.x-scala2.12"
node_type_id: "i3.xlarge"
spark_jar_task:
main_class_name: PrintArgs
libraries:
- jar: ./sample-java/PrintArgs.jar
```
## Tests
Manually + added E2E test for Java jobs
E2E test is temporarily skipped until auth related issues for UC for
tests are resolved
## Changes
Print diagnostics in 'bundle deploy' similar to 'bundle validate'. This
way if a bundle has any errors or warnings, they are going to be easy to
notice.
NB: due to how we render errors, there is one extra trailing new line in
output, preserved in examples below
## Example: No errors or warnings
```
% databricks bundle deploy
Building default...
Deploying resources...
Updating deployment state...
Deployment complete!
```
## Example: Error on load
```
% databricks bundle deploy
Error: Databricks CLI version constraint not satisfied. Required: >= 1337.0.0, current: 0.0.0-dev
```
## Example: Warning on load
```
% databricks bundle deploy
Building default...
Deploying resources...
Updating deployment state...
Deployment complete!
Warning: unknown field: foo
in databricks.yml:6:1
```
## Example: Error + warning on load
```
% databricks bundle deploy
Warning: unknown field: foo
in databricks.yml:6:1
Error: something went wrong
```
## Example: Warning on load + error in init
```
% databricks bundle deploy
Warning: unknown field: foo
in databricks.yml:6:1
Error: Failed to xxx
in yyy.yml
Detailed explanation
in multiple lines
```
## Tests
Tested manually
## Changes
This PR:
1. Moves the if mutator to the bundle package, to live with all-time
greats such as `bundle.Seq` and `bundle.Defer`. Also adds unit tests.
2. `bundle destroy` now returns early if `root_path` does not exist. We
do this by leveraging a `bundle.If` condition.
## Tests
Unit tests and manually.
Here's an example of what it'll look like once the bundle is destroyed.
```
➜ bundle-playground git:(master) ✗ cli bundle destroy
No active deployment found to destroy!
```
I would have added some e2e coverage for this as well, but the
`cobraTestRunner.Run()` method does not seem to return stdout/stderr
logs correctly. We can probably punt looking into it.
## Changes
Previously `SetVariables` mutator mutated typed configuration by using
`v.Set` for variables. This lead to variables `value` field not having
location information.
By using dynamic configuration mutation, we keep the same functionality
but also preserve location information for value when it's set from
default.
Fixes#1568#1538
## Tests
Added unit tests
## Changes
Now local library path in `libraries` section of foreach each tasks are
correctly replaced with remote path for this library when it's uploaded
to Databricks
## Tests
Added unit test
## Changes
At the moment we merge values of complex variables while more expected
behaviour is overriding the value with the target one.
## Tests
Added unit test
## Changes
The FUSE mount of the workspace file system on DBR doesn't include file
extensions for notebooks. When these notebooks are checked into a
repository, they do have an extension. PR #1457 added a filer type that
is aware of this disparity and makes these notebooks show up as if they
do have these extensions.
This change swaps out the native `vfs.Path` with one that uses this
filer when running on DBR.
Follow up: consolidate between interfaces exported by `filer.Filer` and
`vfs.Path`.
## Tests
* Unit tests pass
* (Manually ran a snapshot build on DBR against a bundle with notebooks)
---------
Co-authored-by: Andrew Nester <andrew.nester@databricks.com>
## Changes
Note: this doesn't cover _all_ filesystem interaction.
To intercept calls where read or stat files to determine their type, we
need a layer between our code and the `os` package calls that interact
with the local file system. Interception is necessary to accommodate
differences between a regular local file system and the FUSE-mounted
Workspace File System when running the CLI on DBR.
This change makes use of #1452 in the bundle struct.
It uses #1525 to access the bundle variable in path rewriting.
## Tests
* Unit tests pass.
* Integration tests pass.
## Changes
PyDABs output can omit empty sequences/mappings because we don't track
them as optional. There is no semantic difference between empty and
missing, which makes omitting correct. CLI detects that we falsely
modify input resources by deleting all empty collections.
To handle that, we extend `dyn.Override` to allow visitors to ignore
certain deletes. If we see that an empty sequence or mapping is deleted,
we revert such delete.
## Tests
Unit tests
---------
Co-authored-by: Pieter Noordhuis <pcnoordhuis@gmail.com>
## Changes
Allow PyDABs to report `dyn.Diagnostics` by writing to
`diagnostics.json` supplied as an argument, similar to `input.json` and
`output.json`
Such errors are not yet properly printed in `databricks bundle
validate`, which will be fixed in a follow-up PR.
## Tests
Unit tests
Lennart Kats (databricks)
Pieter Noordhuis
shreyas-goenka
dependabot[bot]
Andrew Nester
Gleb Kanterov
Ilia Babanov
Witold Czaplewski
Renaud Hartert
Alex Moschos