## Changes
A bug in the code that pulls the remote state could cause the local
state to be empty instead of a copy of the remote state. This happened
only if the local state was present and stale when compared to the
remote version.
We correctly checked for the state serial to see if the local state had
to be replaced but didn't seek back on the remote state before writing
it out. Because the staleness check would read the remote state in full,
copying from the same reader would immediately yield an EOF.
## Tests
* Unit tests for state pull and push mutators that rely on a mocked
filer.
* An integration test that deploys the same bundle from multiple paths,
triggering the staleness logic.
Both failed prior to the fix and now pass.
Adds better error message when input path is not a bundle template
before:
```
shreyas.goenka@THW32HFW6T bricks % cli bundle init ~/bricks
Error: open /Users/shreyas.goenka/bricks/databricks_template_schema.json: no such file or directory
```
after:
```
shreyas.goenka@THW32HFW6T bricks % cli bundle init ~/bricks
Error: expected to find a template schema file at /Users/shreyas.goenka/bricks/databricks_template_schema.json
```
## Changes
DLT currently doesn't always set `$PYTHONPATH` correctly (ES-947370).
This restores the original workaround to make new pipelines work while
that issue is being addressed. The workaround was removed in #832.
Manually tested.
## Changes
This PR is the counterpart to #904. With this change, we are able to
convert a `config.Value` into a Go struct, make modifications to the Go
struct, and reflect those changes in a new `config.Value`.
This functionality allows us to incrementally introduce this
configuration representation to existing bundle mutators. Bundle
mutators expect a `*bundle.Bundle` argument and mutate its configuration
directly. These mutations are not reflected in the corresponding
`config.Value` (once introduced), which means we cannot use the
`config.Value` as source of truth until we update _all_ mutators. To
address this, we can run `convert.ToTyped` and `convert.FromTyped` at
the mutator boundary (from `bundle.Apply`) and capture changes made to
the Go struct. Then we can incrementally make mutators aware of the
`config.Value` configuration and have them mutate that structure
directly.
## Tests
New unit tests pass.
Manual spot checks against the bundle configuration type.
## Changes
If args[0] == "." was provided to bundle init command, it would try to
resolve it as a built in template and error out.
## Tests
Manually
before:
```
shreyas.goenka@THW32HFW6T mlops-stack % cli bundle init .
Error: open /var/folders/lg/njll3hjx7pjcgxs6n7b290bw0000gp/T/templates3934264356/templates/databricks_template_schema.json: no such file or directory
```
after:
```
shreyas.goenka@THW32HFW6T mlops-stack % cli bundle init .
Welcome to MLOps Stacks. For detailed information on project generation, see the README at https://github.com/databricks/mlops-stacks/blob/main/README.md.
Project Name [my-mlops-project]: ^C
```
## Changes
We rely on the descriptions to render the prompts to a user. Thus we
should not allow empty descriptions here. Note, both mlops stacks and
the default-python template have descriptions for all their properties
so this should not be an issue.
## Tests
Unit test
## Changes
`os.Getenv(..)` is not friendly with `libs/env`. This PR makes the
relevant changes to places where we need to read user home directory.
## Tests
Mainly done in https://github.com/databricks/cli/pull/914
## Changes
This PR removes validation for default value against the regex pattern
specified in a JSON schema at schema load time. This is required because
https://github.com/databricks/cli/pull/795 introduces parameterising the
default value as a Go text template impling that the default value now
does not necessarily have to match the pattern at schema load time.
This will also unblock:
https://github.com/databricks/mlops-stacks/pull/108
Note, this does not remove runtime validation for input parameters right
before template initialization, which happens here:
fb32e78c9b/libs/template/materialize.go (L76)
## Tests
Changes to existing test.
## Changes
This PR makes a few methods private, exposing cleaner interfaces to get
the string representations for enums and default values of a JSON
Schema.
## Tests
Manually, template initialization for the `default-python` template
still works as expected.
## Changes
Semantics for merging two instances of `config.Value`:
* Merging x with nil or nil with x always yields x
* Merging maps a and b means entries from map b take precedence
* Merging sequences a and b means concatenating them
These are the same semantics that we use today when calling into mergo
in `bundle/config`.
## Tests
Unit tests pass.
## Changes
This functionality is not exercised (and will not be anytime soon).
Instead we use a map to have first party aliases for supported
templates.
1e46b9f88a/cmd/bundle/init.go (L21)
## Tests
Existing tests and manually, bundle init still works.
## Changes
<!-- Summary of your changes that are easy to understand -->
Take @andrefurlan-db 's original
[commit](https://github.com/databricks/cli/compare/databricks:6e21ced...andrefurlan-db:12ed10c)
to add `apps` support to the CLI and add the yaml file-support as an
override (the apps routes are already apart of the Go SDK and are
available for use in the CLI)
**NOTE: this feature is still private preview. CLI usage will be
internal only**
## Tests
<!-- How is this tested? -->
## Changes
This PR introduces a metadata struct that stores a subset of bundle
configuration that we wish to expose to other Databricks services that
wish to integrate with bundles.
This metadata file is uploaded to a file
`${bundle.workspace.state_path}/metadata.json` in the WSFS destination
of the bundle deployment.
Documentation for emitted metadata fields:
* `version`: Version for the metadata file schema
* `config.bundle.git.branch`: Name of the git branch the bundle was
deployed from.
* `config.bundle.git.origin_url`: URL for git remote "origin"
* `config.bundle.git.bundle_root_path`: Relative path of the bundle root
from the root of the git repository. Is set to "." if they are the same.
* `config.bundle.git.commit`: SHA-1 commit hash of the exact commit this
bundle was deployed from. Note, the deployment might not exactly match
this commit version if there are changes that have not been committed to
git at deploy time,
* `file_path`: Path in workspace where we sync bundle files to.
* `resources.jobs.[job-ref].id`: Id of the job
* `resources.jobs.[job-ref].relative_path`: Relative path of the yaml
config file from the bundle root where this job was defined.
Example metadata object when bundle root and git root are the same:
```json
{
"version": 1,
"config": {
"bundle": {
"lock": {},
"git": {
"branch": "master",
"origin_url": "www.host.com",
"commit": "7af8e5d3f5dceffff9295d42d21606ccf056dce0",
"bundle_root_path": "."
}
},
"workspace": {
"file_path": "/Users/shreyas.goenka@databricks.com/.bundle/pipeline-progress/default/files"
},
"resources": {
"jobs": {
"bar": {
"id": "245921165354846",
"relative_path": "databricks.yml"
}
}
},
"sync": {}
}
}
```
Example metadata when the git root is one level above the bundle repo:
```json
{
"version": 1,
"config": {
"bundle": {
"lock": {},
"git": {
"branch": "dev-branch",
"origin_url": "www.my-repo.com",
"commit": "3db46ef750998952b00a2b3e7991e31787e4b98b",
"bundle_root_path": "pipeline-progress"
}
},
"workspace": {
"file_path": "/Users/shreyas.goenka@databricks.com/.bundle/pipeline-progress/default/files"
},
"resources": {
"jobs": {
"bar": {
"id": "245921165354846",
"relative_path": "databricks.yml"
}
}
},
"sync": {}
}
}
```
This unblocks integration to the jobs break glass UI for bundles.
## Tests
Unit tests and integration tests.
## Changes
Adds a welcome_message field to templates and the default python
template.
## Tests
Manually.
Here's the output logs during template init now:
```
shreyas.goenka@THW32HFW6T bricks % cli bundle init
Template to use [default-python]:
Welcome to the sample Databricks Asset Bundle template! Please enter the following information to initialize your sample DAB.
Unique name for this project [my_project]: abcde
Include a stub (sample) notebook in 'abcde/src': no
Include a stub (sample) Delta Live Tables pipeline in 'abcde/src': yes
Include a stub (sample) Python package in 'abcde/src': no
✨ Your new project has been created in the 'abcde' directory!
Please refer to the README.md of your project for further instructions on getting started.
Or read the documentation on Databricks Asset Bundles at https://docs.databricks.com/dev-tools/bundles/index.html.
```
## Changes
This is similar to #904 but instead of converting the dynamic
configuration to Go structs, this normalizes a `config.Value` according
to the type of a Go struct and returns the new, normalized
`config.Value`.
This will be used to ensure that two `config.Value` trees are
type-compatible before we can merge them (i.e. instances from different
files).
Warnings and errors during normalization are accumulated and returned as
a `diag.Diagnostics` structure. We can use this to surface warnings
about unknown fields, or errors about invalid types, in aggregate
instead of one-by-one. This approach is inspired by the pattern to
accumulate diagnostics in Terraform provider code.
## Tests
New unit tests.
## Changes
Now that we have a new YAML loader (see #828), we need code to turn this
into our Go structs.
## Tests
New unit tests pass.
Confirmed that we can replace our existing loader/converter with this
one and that existing unit tests for bundle loading still pass.
## Changes
If a bundle configuration specifies a workspace host, and the user
specifies a profile to use, we perform a check to confirm that the
workspace host in the bundle configuration and the workspace host from
the profile are identical. If they are not, we return an error. The
check was introduced in #571.
Previously, the code included an assumption that the client
configuration was already loaded from the environment prior to
performing the check. This was not the case, and as such if the user
intended to use a non-default path to `.databrickscfg`, this path was
not used when performing the check.
The fix does the following:
* Resolve the configuration prior to performing the check.
* Don't treat the configuration file not existing as an error.
* Add unit tests.
Fixes#884.
## Tests
Unit tests and manual confirmation.
## Changes
In order to support variable interpolation on fields that aren't a
string in the resource types, we need a separate representation of the
bundle configuration tree with the type equivalent of Go's `any`. But
instead of using `any` directly, we can do better and use a custom type
equivalent to `any` that captures additional metadata. In this PR, the
additional metadata is limited to the origin of the configuration value
(file, line number, and column).
The YAML in this commit uses the upstream YAML parser's `yaml.Node` type
to get access to location information. It reimplements the loader that
takes the `yaml.Node` structure and turns it into the configuration tree
we need.
Next steps after this PR:
* Implement configuration tree type checking (against a Go type)
* Implement configuration tree merging (to replace the current merge
functionality)
* Implement conversion to and from the bundle configuration struct
* Perform variable interpolation against this configuration tree (to
support variable interpolation for ints)
* (later) Implement a `jsonloader` that produces the same tree and
includes location information
## Tests
The tests in `yamlloader` perform an equality check on the untyped
output of loading a YAML file between the upstream YAML loader and this
loader. The YAML examples were generated by prompting ChatGPT for
examples that showcase anchors, primitive values, edge cases, etc.
## Changes
Updates to bundle templates can require updated versions of the CLI.
This PR extends the JSON schema representation to allow template authors
to set a min CLI version they require for their templates.
This is required to make improvements/additions to the mlops-stacks repo
## Tests
Tested using unit tests and manually.
For manualy testing, I created a custom build of the CLI using go
releaser and then tested it against a local instance of mlops-stack
When mlops-stack schema has:
```
"min_databricks_cli_version": "v5000.1.1",
```
output (error as expected)
```
shreyas.goenka@THW32HFW6T bricks % ./dist/cli_darwin_arm64/databricks bundle init ~/mlops-stack
Error: minimum CLI version "v5000.1.1" is greater than current CLI version "v0.207.2-dev+1b992c0". Please upgrade your current Databricks CLI
```
When the mlops-stack schema has:
```
"min_databricks_cli_version": "v0.1.1",
```
output (validation passes)
```
shreyas.goenka@THW32HFW6T bricks % ./dist/cli_darwin_arm64/databricks bundle init ~/mlops-stack
Welcome to MLOps Stack. For detailed information on project generation, see the README at https://github.com/databricks/mlops-stack/blob/main/README.md.
Project Name [my-mlops-project]: ^C
```
Improve the output of help, prompts, and so on for `databricks bundle
init` and the default template.
Among other things, this PR adds support for a new `welcome_message`
property that lets a template print a custom message on success:
```
$ databricks bundle init
Template to use [default-python]:
Unique name for this project [my_project]: lennart_project
Include a stub (sample) notebook in 'lennart_project/src': yes
Include a stub (sample) Delta Live Tables pipeline in 'lennart_project/src': yes
Include a stub (sample) Python package in 'lennart_project/src': yes
✨ Your new project has been created in the 'lennart_project' directory!
Please refer to the README.md of your project for further instructions on getting started.
Or read the documentation on Databricks Asset Bundles at https://docs.databricks.com/dev-tools/bundles/index.html.
```
---------
Co-authored-by: shreyas-goenka <88374338+shreyas-goenka@users.noreply.github.com>
## Changes
This PR pays some tech debt by refactoring sync diff computation into
interfaces that are more robust.
Specifically:
1. Refactor the single diff computation function into a `SnapshotState`
class that computes the target state only based on the current local
files making it more robust and not carrying over state from previous
iterations.
2. Adds new validations for the sync state which make sure that the
invariants that downstream code expects are actually held true. This
prevents a class of issues where these invariants break and the
synchroniser behaves unexpectedly.
Note, this does not change the existing schema for the snapshot, only
the way the diff is computed, and thus is backwards compatible (ie does
not require a schema version bump).
## Tests
<!-- How is this tested? -->
This PR adds a few utilities related to Python interpreter detection:
- `python.DetectInterpreters` to detect all Python versions available in
`$PATH` by executing every matched binary name with `--version` flag.
- `python.DetectVirtualEnvPath` to detect if there's any child virtual
environment in `src` directory
- `python.DetectExecutable` to detect if there's python3 installed
either by `which python3` command or by calling
`python.DetectInterpreters().AtLeast("v3.8")`
To be merged after https://github.com/databricks/cli/pull/804, as one of
the steps to get https://github.com/databricks/cli/pull/637 in, as
previously discussed.
## Changes
The jobs backend propagates job tags to the underlying cloud provider's
resources. As such, they need to match the constraints a cloud provider
places on tag values. The display name can contain anything. With this
change, we modify the tag value to equal the short name as used in the
name prefix.
Additionally, we leverage tag normalization as introduced in #819 to
make sure characters that aren't accepted are removed before using the
value as a tag value.
This is a new stab at #810 and should completely eliminate this class of
problems.
## Tests
Tests pass.
## Changes
Prompted by the proposed fix for a tagging-related problem in #810, I
investigated how tag validation works. This turned out to be quite a bit
more complex than anticipated. Tags at the job level (or cluster level)
are passed through to the underlying compute infrastructure and as such
are tested against cloud-specific validation rules. GCP appears to be
the most restrictive. It would be disappointing to always restrict to
`\w+`, so this package implements validation and normalization rules for
each cloud. It can pick the right cloud to use using a Go SDK
configuration.
## Tests
Exhaustive unit tests. The regular expressions were pulled by #814.
## Changes
This PR adds higher-level wrappers for calling subprocesses. One of the
steps to get https://github.com/databricks/cli/pull/637 in, as
previously discussed.
The reason to add `process.Forwarded()` is to proxy Python's `input()`
calls from a child process seamlessly. Another use-case is plugging in
`less` as a pager for the list results.
## Tests
`make test`
## Changes
This PR introduces support for regex pattern validation in our custom
jsonschema validator. This allows us to fail early if a user enters an
invalid value for a field.
For example, now this is what initializing the default template looks
like with an invalid project name:
```
shreyas.goenka@THW32HFW6T bricks % cli bundle init
Template to use [default-python]:
Unique name for this project [my_project]: (_*_)
Error: invalid value for project_name: (_*_). Must consist of letter and underscores only.
```
## Tests
New unit tests and manually.
## Changes
Git repos hosted over HTTP do not support shallow cloning. This PR adds
retry logic if we detect shallow cloning is not supported.
Note I saw the match string `dumb http transport does not support
shallow capabilities` being reported in for different hosts on the
internet, so this should work accross a large class of git servers.
Howerver, it's not strictly necessary to have the `--depth` flag so we
can remove it if this issue is reported again.
## Tests
Tested manually. `bundle init` successfully downloads the private HTTP
repo reported during by internal user.
## Changes
The previous implementation ran the risk of infinite looping for the
account client due to a mismatch in determining what constitutes an
account client between the CLI and SDK (see
[here](83443bae8d/libs/databrickscfg/profiles.go (L61))
and
[here](0fdc5165e5/config/config.go (L160))).
Ultimately, this code must never infinite loop. If a user is prompted
and selects a profile that cannot be used, they should receive that
feedback immediately and try again, instead of being prompted again.
Related to #726.
## Tests
<!-- How is this tested? -->
## Changes
There are a couple places throughout the code base where interaction
with environment variables takes place. Moreover, more than one of these
would try to read a value from more than one environment variable as
fallback (for backwards compatibility). This change consolidates those
accesses.
The majority of diffs in this change are mechanical (i.e. add an
argument or replace a call).
This change:
* Moves common environment variable lookups for bundles to
`bundles/env`.
* Adds a `libs/env` package that wraps `os.LookupEnv` and `os.Getenv`
and allows for overrides to take place in a `context.Context`. By
scoping overrides to a `context.Context` we can avoid `t.Setenv` in
testing and unlock parallel test execution for integration tests.
* Updates call sites to pass through a `context.Context` where needed.
* For bundles, introduces `DATABRICKS_BUNDLE_ROOT` as new primary
variable instead of `BUNDLE_ROOT`. This was the last environment
variable that did not use the `DATABRICKS_` prefix.
## Tests
Unit tests pass.
## Changes
This PR includes:
1. Adding enum field to the json schema struct
2. Adding prompting logic for enum values. See demo for how it looks
3. Validation rules, validating the default value and config values when
an enum list is specified
This will now enable template authors to use enums for input parameters.
## Tests
Manually and new unit tests
## Changes
At a high level this PR adds new schema validation and moves
functionality that should be present in the jsonschema package, but
resides in the template package today, to the jsonschema package. This
includes for example schema validation, schema instance validation, to /
from string conversion methods etc.
The list below outlines all the pieces that have been moved over, and
the new validation bits added.
This PR:
1. Adds casting default value of schema properties to integers to the
jsonschema.Load method.
2. Adds validation for default value types for schema properties,
checking they are consistant with the type defined.
3. Introduces the LoadInstance and ValidateInstance methods to the json
schema package. These methods can be used to read and validate JSON
documents against the schema.
4. Replaces validation done for template inputs to use the newly defined
JSON schema validation functions.
5. Moves to/from string and isInteger utility methods to the json schema
package.
## Tests
Existing and new unit tests.
## Changes
This fixes a typo that caused the notebook.ipynb file to show up even if
the user answered "no" to the question about including a notebook.
## Tests
We have matrix validation tests for all the yes/no combinations and
whether the build + validate. There is no current test for the absence
of files.
## Changes
This follows up on https://github.com/databricks/cli/pull/686. This PR
makes our stubs optional + it adds DLT stubs:
```
$ databricks bundle init
Template to use [default-python]: default-python
Unique name for this project [my_project]: my_project
Include a stub (sample) notebook in 'my_project/src' [yes]: yes
Include a stub (sample) DLT pipeline in 'my_project/src' [yes]: yes
Include a stub (sample) Python package 'my_project/src' [yes]: yes
✨ Successfully initialized template
```
## Tests
Manual testing, matrix tests.
---------
Co-authored-by: Andrew Nester <andrew.nester@databricks.com>
Co-authored-by: PaulCornellDB <paul.cornell@databricks.com>
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
This adds a built-in "default-python" template to the CLI. This is based
on the new default-template support of
https://github.com/databricks/cli/pull/685.
The goal here is to offer an experience where customers can simply type
`databricks bundle init` to get a default template:
```
$ databricks bundle init
Template to use [default-python]: default-python
Unique name for this project [my_project]: my_project
✨ Successfully initialized template
```
The present template:
- [x] Works well with VS Code
- [x] Works well with the workspace
- [x] Works well with DB Connect
- [x] Uses minimal stubs rather than boiler-plate-heavy examples
I'll have a followup with tests + DLT support.
---------
Co-authored-by: Andrew Nester <andrew.nester@databricks.com>
Co-authored-by: PaulCornellDB <paul.cornell@databricks.com>
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
The latest rendition of isServicePrincipal no longer worked for
non-admin users as it used the "principals get" API.
This new version relies on the property that service principals always
have a UUID as their userName. This was tested with the eng-jaws
principal (8b948b2e-d2b5-4b9e-8274-11b596f3b652).
## Changes
JSON schema properties are a map and thus unordered.
This PR introduces a JSON schema extension field called `order` to allow
template authors to define the order in which template variables should
be resolved/prompted.
## Tests
Unit tests.
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
* Update Go SDK to v0.19.0
* Update commands per OpenAPI spec from Go SDK
* Incorporate `client.Do()` signature change to include a (nil) header
map
* Update `workspace.WorkspaceService` mock with permissions methods
* Skip `files` service in codegen; already implemented under the `fs`
command
## Tests
Unit and integration tests pass.
## Changes
This pull request extends the templating support in preparation of a
new, default template (WIP, https://github.com/databricks/cli/pull/686):
* builtin templates that can be initialized using e.g. `databricks
bundle init default-python`
* builtin templates are embedded into the executable using go's `embed`
functionality, making sure they're co-versioned with the CLI
* new helpers to get the workspace name, current user name, etc. help
craft a complete template
* (not enabled yet) when the user types `databricks bundle init` they
can interactively select the `default-python` template
And makes two tangentially related changes:
* IsServicePrincipal now uses the "users" API rather than the
"principals" API, since the latter is too slow for our purposes.
* mode: prod no longer requires the 'target.prod.git' setting. It's hard
to set that from a template. (Pieter is planning an overhaul of warnings
support; this would be one of the first warnings we show.)
The actual `default-python` template is maintained in a separate PR:
https://github.com/databricks/cli/pull/686
## Tests
Unit tests, manual testing
This command takes the user through the interactive flow to set up OAuth
for a fresh account, where only Basic authentication works.
---------
Co-authored-by: Andrew Nester <andrew.nester@databricks.com>
## Changes
The pattern `.*` in a `.gitignore` file can match `.` when walking all
files in a repository. If it does, then the walker immediately aborts
and no files are returned. The root directory (an unnamed directory)
must never be ignored.
Reported in https://github.com/databricks/databricks-vscode/issues/837.
## Tests
New tests pass.
## Changes
This PR:
1. Renames the project-dir flag to output-dir
2. Makes the project dir flag optional. When unspecified we default to
the current working directory.
## Tests
Manually
---------
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Go text templates allows only specifying one input argument for
invocations of associated templates (ie `{{template ...}}`). This PR
introduces the map and pair functions which allow template authors to
work around this limitation by passing multiple arguments as key value
pairs in a map.
This PR is based on feedback from the mlops stacks migration where
otherwise a bunch of duplicate code is required for computed values and
fixtures.
## Tests
Unit test
## Changes
Prompt UI glitches often. We are switching to a custom implementation of
a simple prompter which is much more stable.
This also allows new lines in prompts which has been an ask by the
mlflow team.
## Tests
Tested manually
## Changes
Adds a function to validate json schema types added by the author. The
default json unmarshaller does not validate that the parsed type matches
the enum defined in `jsonschema.Type`
Includes some other improvements to provide better error messages.
This PR was prompted by usability difficulties reported by @mingyu89
during mlops stack migration.
## Tests
Unit tests
## Changes
#629 introduced a change to autopopulate the host from .databrickscfg if
the user is logging back into a host they were previously using. This
did not respect the DATABRICKS_CONFIG_FILE env variable, causing the
flow to stop working for users with no .databrickscfg file in their home
directory.
This PR refactors all config file loading to go through one interface,
`databrickscfg.GetDatabricksCfg()`, and an auxiliary
`databrickscfg.GetDatabricksCfgPath()` to get the configured file path.
Closes#655.
## Tests
```
$ databricks auth login --profile abc
Error: open /Users/miles/.databrickscfg: no such file or directory
$ ./cli auth login --profile abc
Error: cannot load Databricks config file: open /Users/miles/.databrickscfg: no such file or directory
$ DATABRICKS_CONFIG_FILE=~/.databrickscfg.bak ./cli auth login --profile abc
Databricks Host: https://asdf
```
## Changes
The `.tmpl` extension is only meant as a qualifier for whether the file
content is executed as a template. All file paths in the `template`
directory should be treated as valid go text templates.
Before only paths with the `.tmpl` extensions would be resolved as
templates, after this change, all file paths are interpreted as
templates.
## Tests
Unit test. The newly added unit tests also asserts that the file path is
correct, even when the `.tmpl` extension is missing.
## Changes
The functions in `libs/git/git.go` assumed global state (e.g. working
directory) and were no longer used.
This change consolidates the functionality to turn an origin URL into an
HTTPS URL.
Closes#187.
## Tests
Expanded existing unit test.
## Changes
This PR:
1. Fixes the computation logic for `ActualBranch`. An error in the
earlier logic caused the validation mutator to be a no-op.
2. Makes the `.git` string a global var. This is useful to configure in
tests.
3. Adds e2e test for the validation mutator.
## Tests
Unit test
## Changes
This PR adds two features:
1. The bundle init command
2. Support for prompting for input values
In order to do this, this PR also introduces a new `config` struct which
handles reading config files, prompting users and all validation steps
before we materialize the template
With this PR users can start authoring custom templates, based on go
text templates, for their projects / orgs.
## Tests
Unit tests, both existing and new
## Changes
This PR:
1. Adds code for reading template configs and validating them against a
JSON schema.
2. Moves the json schema struct in `bundle/schema` to a separate library
package. This struct is now reused for validating template configs.
## Tests
Unit tests
## Changes
In a world before this PR, all files would be treated as `go text
templates`, making the content in these files quake in fear since they
would be executed (as a template).
This PR makes it so that only files with the `.tmpl` extension are
understood to be templates. This is useful for avoiding ambiguity in
cases like where a binary file could be interpreted as a go text
template otherwise.
In order to do so, we introduce the `copyFile` struct which does a copy
of the source file from the template without loading it into memory.
## Tests
Unit tests
## Changes
This adds `mode: production` option. This mode doesn't do any
transformations but verifies that an environment is configured correctly
for production:
```
environments:
prod:
mode: production
# paths should not be scoped to a user (unless a service principal is used)
root_path: /Shared/non_user_path/...
# run_as and permissions should be set at the resource level (or at the top level when that is implemented)
run_as:
user_name: Alice
permissions:
- level: CAN_MANAGE
user_name: Alice
```
Additionally, this extends the existing `mode: development` option,
* now prefixing deployed assets with `[dev your.user]` instead of just
`[dev`]
* validating that development deployments _are_ scoped to a user
## Related
https://github.com/databricks/cli/pull/578/files (in draft)
## Tests
Manual testing to validate the experience, error messages, and
functionality with all resource types. Automated unit tests.
---------
Co-authored-by: Fabian Jakobs <fabian.jakobs@databricks.com>
## Changes
This PR changes the integration test to just check an error is returned
rather than asserting specific text is present in the error. This is
required because the error returned can be different based on whether
git ssh keys have been setup.
## Changes
Add unit test that raw strings are printed as is. This method is useful
to print text that would otherwise be interpreted a go text template.
## Changes
Due to a bug in Github UI, https://github.com/databricks/cli/pull/589
got merged without passing the go/fmt formatting checks
This PR fixes the formatting which breaks the PR checks
## Changes
Earlier we removed recursive deletion from sync. This makes it safe
enough for us to not restrict sync to just the namespace of the user.
This PR removes that base path validation.
Note: If the sync destination is under `/Repos` we still only create
missing directories required if the path is under my namespace ie
matches `/Repos/@me/`
## Tests
Manually
Before:
```
shreyas.goenka@THW32HFW6T hello-bundle % cli bundle deploy
Starting upload of bundle files
Error: path must be nested under /Users/shreyas.goenka@databricks.com or /Repos/shreyas.goenka@databricks.com
```
After:
```
shreyas.goenka@THW32HFW6T hello-bundle % cli bundle deploy
Starting upload of bundle files
Uploaded bundle files at /Shared/common-test/hello-bundle/files!
Starting resource deployment
Resource deployment completed!
```
## Changes
Correctly use --profile flag passed for all bundle commands.
Also adds a validation that if bundle configured host mismatches
provided profile, it throws an error.
Co-authored-by: Pieter Noordhuis <pieter.noordhuis@databricks.com>
## Changes
Currently, `databricks --profile <TAB>` autocompletes with the shell
default behavior, listing files in the local directory. This is not a
great experience. Especially given that the suggested profile names for
accounts are so long, it can be cumbersome to type them out by hand.
This PR configures autocompletion for `--profile` to inspect the
profiles of ~/.databrickscfg.
One potential improvement is to filter the response based on whether the
command is known to be account-level or workspace-level.
## Tests
Manual test.
<img width="579" alt="Screenshot_11_07_2023__18_31"
src="https://github.com/databricks/cli/assets/1850319/d7a3acd0-2511-45ac-bd82-95567775c10a">
## Changes
Two issues with this command:
* The command line arguments for the secret value were ignored
* If the secret value was piped through stdin, it would still prompt
The second issue prevented users from using multi-line strings because
the prompt reads until end-of-line.
This change adds testing infrastructure for:
* Setting up a workspace focused test (common between many tests)
* Running a snippet of Python through the command execution API
Porting more integration tests to use this infrastructure will be done
in later commits.
## Tests
New integration test passes.
The interactive path cannot be integration tested just yet.
## Changes
Also see #525.
The direct download flag has been removed in newer versions because of
the content type issue.
Instead, we can make the command decode the base64 output when the
output mode is text.
```
$ databricks workspace export /some/path/script.sh
#!/bin/bash
echo "this is a script"
```
## Tests
New integration test.
## Changes
Use the download method from the SDK in the read method for the WSFS
implementation of the filer interface.
Closes#452.
## Tests
Tested by existing integration tests
## Changes
This PR removes the stat call and instead relies on errors returned by
the go SDK to return the appropriate errors
## Tests
Tested using existing filer integration tests
## Tests
New integration test for the read/write parts of the other filers. The
integration test cannot be shared just yet because the Files API doesn't
include support for creating/listing/removing directories yet.
## Changes
The ini library omits the default section header and in doing so breaks
compatibility with Python's config parser. It raises:
```
Error: MissingSectionHeaderError: File contains no section headers.
```
This commit makes sure the DEFAULT section header is included.
If the config file doesn't include a DEFAULT section itself, we include
a comment describing its purpose.
## Tests
New tests pass. Manually confirmed the DEFAULT section header is
included.
---------
Co-authored-by: PaulCornellDB <paul.cornell@databricks.com>
Pieter Noordhuis
shreyas-goenka
Lennart Kats (databricks)
Andrew Nester
Serge Smertin
Taiga Matsumoto
Miles Yucht